Command |
Description |
%AANNTTCCFF |
Set Module Configuration |
$AA0Ci |
Zero calibration |
$AA1Ci |
Span calibration |
$AA2 |
Read configuration |
$AA4
|
Read the synchronized data
|
$AA5VV |
Set channel enable/disable status |
$AA6 |
Read channel enable/disable status |
$AA7CiRrr
|
Set single channel eype
configuration |
$AA8Ci
|
Read single channel type
|
$AAB
|
Read channel open wire status
|
$AAF |
Read firmware version |
$AAI
|
Read module INIT status
|
$AAM |
Read module name |
$AAS0
|
Internal Calibration |
$AAS1
|
Reload to default calibrating parameter |
#AA |
Read analog inputs of all channels |
#AAN |
Read analog input of specificed channel |
@AAA2CiTnn
|
Set specificed channel temperature offset
|
@AAA3Ci
|
Read specificed channel temperauture offset
|
@AACHCi
|
Clear high alarm of specificed
analog input channel
|
@AACLCi
|
Clear low alarm of specificed
analog input channel |
@AADODD
|
Set digital output
|
@AADHCi
|
Disable hgih alarm of specificed
analog input channel
|
@AADLCi
|
Disable low alarm of specificed
analog input channel |
@AADI
|
Read digital output status
|
@AAGxTtt
|
Read the Steinhart Coefficient
of user defined type
|
@AAHI(Data)CiTOj
|
Set high alarm of specificed
analog input channel |
@AALO(Data)CiTOj
|
Set low alarm of specificed
analog input channel |
@AARAOj
|
Read the current alarms
associated with specificed digital output channel
|
@AARHCi
|
Read specificed analog channel
high alarm setting
|
@AARLCi
|
Read specificed analog channel
high alarm setting |
@AAROOj
|
Read alarms associated with
specificed digital output channel
|
@AARTTttR(Data)
|
Read the temperature
corresponding to the resistance of user-defined type
|
@AASxTTttC(Data)
|
Set the Steinhart Coefficient of
user-defined type
|
~AA0 |
Read module status |
~AA1 |
Reset module status |
~AA2 |
Read host watchdog timeout setting |
~AA3ETT |
Set host watchdog timeout setting |
~AA4
|
Read digital output power on and
safe value
|
~AA5PPSS
|
Set digital output power on and
safe value
|
~AAD
|
Read the temperaure scaling
|
~AADT
|
Set the temperautre scaling
|
~AAEV
|
Enable/Disable calibration
|
~AAI
|
Enable soft INIT
|
~AAO(Name) |
Set module name |
~AARD
|
Read DCON response delay time |
~AARDVV
|
Set DCON response delay time |
~AATnn
|
Set soft INIT timeout
|