Command	@AADI
Description	Read Alarm Status and Digital Output/Input Status
Syntax	@AADI[CHK](cr) @ a delimiter character AA address of reading module (00 to FF) DI command for reading digital output status and alarm status. [CHK] 2 characters of Checksum (cr) Character Return(0x0D) for denote the end of command
Response	Valid Command !AASOOII[CHK](cr) Invalid Command ?AA[CHK](cr) Syntax error or communication error may get no response. ! delimiter for valid command ? delimiter for invalid command. AA address of response module (00 to FF) S alarm enable status 0 = alarm disabled 1 = momentary alarm enabled 2 = latch alarm enabled OO digital output status 00 = DO1 off, DO0 off 01 = DO1 off, DO0 on 02 = DO1 on, DO0 off 03 = DO1 on, DO0 on II digital input status 00 = DI1 off, DI0 off 01 = DI1 off, DI0 on 02 = DI1 on, DI0 off 03 = DI1 on, DI0 on [CHK] 2 characters of Checksum (cr) Character Return(0x0D) for denote the end of response
Example	Command @01DI Response !0100000 Description Read address 01 digital input/output and alarm status, return alarm disabled, digital input/output all off
Reference

Back to Previous Page