Command |
$AA3 |
Description |
Read channel enable/disable status (I-87016W)
|
Syntax |
$AA3[CHK](cr)
$ |
a delimiter character |
AA |
address of reading module (00 to FF) |
3 |
command for reading channel enable/disable status |
[CHK] |
2 characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of command |
|
Response |
Valid Command |
!AAVV[CHK](cr) |
Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
! |
delimiter for valid command |
? |
delimiter for invalid command. |
AA |
address of response module (00 to FF) |
VV |
channel enable/disable status, 00 is all disabled and 03 is all enabled |
[CHK] |
2 characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of response |
|
Example |
Command |
$013 |
Response |
!0102 |
Description |
Read address 01 channel status, response channel 0 is disabled
and channel 1 is enabled. |
|
Reference |
$AA5VV
|
|