Command	$AA3NVV
Description	Trim output of specificed channel
Syntax	$AA3NVV[CHK](cr) $ a delimiter character AA address of setting module (00 to FF) 3 command for trim output N specificed channel for calibration VV trim value, 00 for no change, increase from 01 to 7F(+127), and decrease from FF(-1) to 80(-128) I-87022/26/24C/28C : Type = 0/1, 4.88 uA each count Type = 2, 2.44m V each count I-87024 : Type = 30/31, 0.3uA each count Type = 32/33/34/35, 0.15mV each count [CHK] 2 characters of Checksum (cr) Character Return(0x0D) for denote the end of command
Response	Valid Command !AA[CHK](cr) Invalid Command ?AA[CHK](cr) Syntax error or communication error may get no response. ! delimiter for valid command ? delimiter for invalid command. AA address of response module (00 to FF) [CHK] 2 characters of Checksum (cr) Character Return(0x0D) for denote the end of response
Example	Command $01321F Response !01 Description Trim analog output of channel 2 of channel 1 to increase 31 counts, response success.
Reference	$AA0N $AA1N

Back to Previous Page