| Command |
$AA1L(data) |
| Description |
Set Non-isolated Low Trigger Level |
| Syntax |
$AA1L(data)[CHK](cr)
| $ |
a delimiter character |
| AA |
address of setting module (00 to FF) |
| 1L |
command for setting non-isolated low trigger level |
| (data) |
low trigger level in 0.1V unit.
The data is from 01 to 50 to present trigger level from 0.1V to 5.0V |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AA[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command. |
| AA |
address of response module (00 to FF) |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
$011L08 |
| Response |
!01 |
| Description |
Set address 01 non-isolated low trigger level to 0.8V, return success |
|
|
| Reference |
$AA1H
$AA1H(data)
$AA1L
|
|