| Command |
Description |
| %AANNTTCCFF |
Set Module Configuration |
| $AA0Ci |
Perform a zero calibration on the specified channel |
| $AA1Ci |
Perform a span calibration on the specified channel |
| $AA2 |
Read configuration |
| $AA3 |
Read Cold-Junction Compensation(CJC) temperature |
| $AA5VV |
Set channel enable/disable status |
| $AA6 |
Read channel enable/disable status |
| $AA7CiRrr |
Set Single Channel Range Configuration |
| $AA8Ci |
Read Single Channel Range Configuration |
| $AA9(Data) |
Set Cold-Junction Compensation(CJC) temperature offset |
| $AA9(Data)Ci |
Set Cold-Junction Compensation(CJC) temperature offset on the specified
channel |
| $AAF |
Read firmware version |
| $AAI |
Read the status of INIT |
| $AAM |
Read module name |
| $AAS0 |
Internal Calibration |
| $AAS1 |
Reload Default Calibration Parameter |
| #AA |
Read analog inputs of all channels |
| #AAN |
Read analog input of specified channel |
| ~AA0 |
Read module status |
| ~AA1 |
Reset module status |
| ~AA2 |
Read host watchdog timeout setting |
| ~AA3ETT |
Set host watchdog timeout setting |
| ~AAC |
Read the CJC Enable/Disable |
| ~AACN |
Enable/Disable the CJC |
| ~AAO(Name) |
Set module name |