| Command |
$AA1Ci |
| Description |
Perform Single Channel Span Calibration |
| Syntax |
$AA1Ci[CHK](cr)
| $ |
a delimiter character |
| AA |
address of setting module (00 to FF) |
| 1 |
command for performing span calibration |
| Ci |
represent the specified input channel |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AA[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command. |
| AA |
address of response module (00 to FF) |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
$010C0 |
| Response |
!01 |
| Description |
Perform span calibraion on channel 0 of address 01
module, return success
|
|
| Command |
$030C1 |
| Response |
?03 |
| Description |
Perform span calibraion on channel 1 of address 03
module, return not enable calibration before calibration command |
|
| Reference |
$AA0Ci
~AAEV
Calibration
|
|