| Command |
$AA0Ci |
| Description |
Perform Single Channel Zero Calibration |
| Syntax |
$AA0Ci[CHK](cr)
| $ |
a delimiter character |
| AA |
address of setting module (00 to FF) |
| 0 |
command for performing zero calibration |
| Ci |
0 command for span calibration |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AA[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command. |
| AA |
address of response module (00 to FF) |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
$010C0 |
| Response |
!01 |
| Description |
Perform zero calibraion on channel 0 of address 01
module, return success. |
|
| Command |
$020C5 |
| Response |
!02 |
| Description |
Perform zero calibraion on channel 5 of address 02
module, return success. |
|
| Command |
$030C1 |
| Response |
?03 |
| Description |
Perform zero calibraion on channel 1 of address 03
module, return not enable calibration before calibration |
|
| Reference |
$AA1Ci
~AAEV
Calibration
|
|