| Command |
Description |
| General Command Sets |
| %AANNTTCCFF |
Set Module Configuration |
| $AA2 |
Read module configuration |
| $AAF |
Read firmware version |
| $AAM |
Read module name |
| #AAN |
Read Counter/Frequency |
| $AA1H |
Read Non-isolated High Trigger Level |
| $AA1H(data) |
Set Non-isolated High Trigger Level |
| $AA1L |
Read Non-isolated Low Trigger Level |
| $AA1L(data) |
Set Non-isolated Low Trigger Level |
| $AAB |
Read Input Mode |
| $AABS |
Set Input Mode |
| ~AAO(Name) |
Set module name |
| Counter Command Sets |
| $AAA |
Read Gate Mode |
| $AAAG |
Set Gate Mode |
| $AA3N |
Read Max. Counter Value |
| $AA3N(Data) |
Set Max. Counter Value |
| $AA5N |
Read Counter Status |
| $AA5NS |
Start/Stop Counter |
| $AA6N |
Clear Counter |
| $AA7N |
Read/Clear Overflow Flag |
| @AAGN |
Read Preset Count Value of Counter N |
| @AAPN(Data) |
Set Preset Count Value of Counter N |
| Digital Filter Command Sets |
| $AA4 |
Read Digital Filter Status |
| $AA4S |
Enabled/Disabled Digital Filter |
| $AA0H |
Read Min. Input Width at High Level |
| $AA0H(Data) |
Set Min. Input Width at High Level |
| $AA0L |
Read Min. Input Width at Low Level |
| $AA0L(Data) |
Set Min. Input Width at Low Level |
| Alarm command Sets |
| ~AAAS |
Set Alarm Mode |
| @AACA |
Clear Latch Alarm |
| @AADA |
Disable Alarm |
| @AADI |
Read Digital Output Status and Alarm Status |
| @AADO(Data) |
Set Digital Output |
| @AAEAT |
Enable Alarm |
| @AAPA(Data) |
Set Alarm Value 0 |
| @AARP |
Read Alarm Value 0 |
| @AASA(Data) |
Set Alarm Value 1 |
| @AARA |
Read Alarm Value 1 |
| Host Watchdog Related Command Sets |
| ~** |
Host OK |
| ~AA0 |
Read module status |
| ~AA1 |
Reset module status |
| ~AA2 |
Read host watchdog timeout setting |
| ~AA3ETT |
Set host watchdog timeout setting |