Type Selection
Module Available Type
I-87005W
 Thermistor Input
I-87013 RTD Input
I-87015 RTD Input
I-87015T Thermistor Input
I-87016W
 mV, V or Current Input
I-87017/87017RW/I-87017DW/I-8/7017W/I-87017W-RMS mV, V or Current Input
I-87017RC Current Input
I-87018/I-87018RW/I-87018W
I-87018PW/I-87018ZW		 mV, V or Current Input
Thermocouple Input
I-/87017ML Voltage Input
I-87019R mV, V or Current Input
Thermocouple Input
I-87022 Analog Output
I-87024/I-87024W/I-87024DW/I-87024RW Analog Output
I-87026 Analog Output
I-87024C/I-87028C Analog Output
I-87024UW/I-87028UW
 Analog Output
I-8704x/5x/6x Digital Input/Output
I-87082/I-87082W Counter/Frequency Measurement
I-87084W
 Counter/Frequecy/Encoder Input

Back to Previous Page


Type 00 to 06 Definition ( for I-87016W and I-87018 Series )
Type Code Input Range Data Format Full Scale Zero Negative Full Scale
00 -15mV to +15mV Engineer Unit +15.000 +00.000 -15.000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
01 -50mV to +50mV Engineer Unit +50.000 +00.000 -50.000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
02 -100mV to +100mV Engineer Unit +100.00 +000.00 -100.00
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
03 -500mV to +500mV Engineer Unit +500.00 +000.00 -500.00
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
04 -1V to +1V Engineer Unit +1.0000 +0.0000 -1.0000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
05 -2.5V to +2.5V Engineer Unit +2.5000 +0.0000 -2.5000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
06*1  -20mA to +20mA
with 125 ohms resistor		 Engineer Unit +20.000 +00.0000 -20.000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000

Note:

*1:  When I-87018 and I-87018R are connecting to a current source set to 06 type code, an optional external 125 Ohms resistor is required.

Back to Previous Page


Type 08 to 0D Definition ( for I-87017 Series )
Type Code Input Range Data Format Full Scale Zero Negative Full Scale
08 -10V to +10V Engineer Unit +10.000 +00.000 -10.000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
09 -5V to +5V Engineer Unit +5.0000 +0.0000 -5.0000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
0A -1V to +1V Engineer Unit +1.0000 +0.0000 -1.0000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
0B -500mV to +500mV Engineer Unit +500.00 +000.00 -500.00
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
0C -150mV to +150mV Engineer Unit +150.00 +000.00 -150.00
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
0D*1  -20mA to +20mA
 Engineer Unit +20.000 +00.0000 -20.000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000

Note:
*1:  When I-87017 and I-87017R are connecting to a current source set to OD type code, an optional external 125 Ohms resistor is required.

*2:  I-87017W-RMS input range (0 ~ +10 Vrms, 0 ~ +5 Vrms, 0 ~ +1 Vrms, 0 ~ +500 mVrms, 0 ~ +150 Vrms) No Negative Full Scale.


Back to Previous Page

Type 07 to 1A Definition ( for I-87017RC )
Type Code Input Range Data Format Max Value Min Value
07 +4mA to +20mA
 Engineer Unit +20.000 +04.000
% of FSR +100.00 +000.00
2's Complement HEX FFFF 0000
0D -20mA to +20mA
 Engineer Unit +20.000 -20.000
% of FSR +100.00 -100.00
2's Complement HEX 7FFF 8000
1A +0mA to +20mA
 Engineer Unit +20.000 +00.000
% of FSR +100.00 +000.00
2's Complement HEX FFFF 0000

Note:

  1. I-87017RC has built-in 125 Ohms resistors for each channels. When connecting to a current source, no add any external resistors required.


Back to Previous Page

 

Thermocouple Type Definition ( for I-87018/ 87018R/ 87019R )
Type Code Thermocouple Type Data Format Max Value Min Value
0E J Type Engineer Unit +760.00 -210.00
% of FSR +100.00 -027.63
2's Complement HEX 7FFF DCA2
0F K Type Engineer Unit +1372.0 -0270.0
% of FSR +100.00 -019.68
2's Complement HEX 7FFF E6D0
10 T Type Engineer Unit +400.00 -270.00
% of FSR +100.00 -067.50
2's Complement HEX 7FFF A99A
11 E Type Engineer Unit +1000.0 -0270.0
% of FSR +100.00 -027.00
2's Complement HEX 7FFF DD71
12 R Type Engineer Unit +1768.0 +0000.0
% of FSR +100.00 +000.00
2's Complement HEX 7FFF 0000
13 S Type Engineer Unit +1768.0 +0000.0
% of FSR +100.00 +000.00
2's Complement HEX 7FFF 0000
14 B Type Engineer Unit +1820.0 +0000.0
% of FSR +100.00 +000.00
2's Complement HEX 7FFF 0000
15 N Type Engineer Unit +1300.0 -0270.0
% of FSR +100.00 -020.77
2's Complement HEX 7FFF E56B
16 C Type Engineer Unit +2320.0 +0000.0
% of FSR +100.00 +000.00
2's Complement HEX 7FFF 0000
17 L Type Engineer Unit +800.00 -200.00
% of FSR +100.00 -025.00
2's Complement HEX 7FFF E000
18 M Type Engineer Unit +100.00 -200.00
% of FSR +050.00 -100.00
2's Complement HEX 4000 8000
19 L Type
DIN43710		 Engineer Unit +900.00 -200.00
% of FSR +100.00 -022.22
2's Complement HEX 7FFF E38F

Thermocouple Input Type Over/Under Range Response
Data Format Over Range Under Range
Engineer Unit +9999 -0000
% of FSR +9999 -0000
2's Complement HEX 7FFF 8000

Note:
1 : Getting the +9999 over range value in all of thermocouple type codes, it  means that the thermocouple wires were broken.

Back to Previous Page



Type 00 to 19 Definition ( for I-87019R )
Type Code Input Range Data Format Full Scale Zero Negative Full Scale
00 -15mV to +15mV Engineer Unit +15.000 +00.000 -15.000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
01 -50mV to +50mV Engineer Unit +50.000 +00.000 -50.000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
02 -100mV to +100mV Engineer Unit +100.00 +000.00 -100.00
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
03 -500mV to +500mV Engineer Unit +500.00 +000.00 -500.00
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
04 -1V to +1V Engineer Unit +1.0000 +0.0000 -1.0000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
05 -2.5V to +2.5V Engineer Unit +2.5000 +0.0000 -2.5000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
06 -20mA to +20mA
with 125 ohms resistor		 Engineer Unit +20.000 +00.0000 -20.000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
08 -10V to +10V Engineer Unit +10.000 +00.000 -10.000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
09 -5V to +5V Engineer Unit +5.0000 +0.0000 -5.0000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
0A -1V to +1V Engineer Unit +1.0000 +0.0000 -1.0000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
0B -500mV to +500mV Engineer Unit +500.00 +000.00 -500.00
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
0C -150mV to +150mV Engineer Unit +150.00 +000.00 -150.00
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
0D -20mA to +20mA
with 125 ohms resistor		 Engineer Unit +20.000 +00.0000 -20.000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
0E J Type Engineer Unit +760.00 +00.000 -210.00
% of FSR +100.00 +000.00 -027.63
2's Complement HEX 7FFF 0000 DCA2
0F K Type Engineer Unit +1372.0 +00.000 -0270.0
% of FSR +100.00 +000.00 -019.68
2's Complement HEX 7FFF 0000 E6D0
10 T Type Engineer Unit +400.00 +000.00 -270.00
% of FSR +100.00 +000.00 -067.50
2's Complement HEX 7FFF 0000 A99A
11 E Type Engineer Unit +1000.0 +000.00 -0270.0
% of FSR +100.00 +000.00 -027.00
2's Complement HEX 7FFF 0000 DD71
12 R Type Engineer Unit +1768.0 +00.000 +0000.0
% of FSR +100.00 +000.00 +000.00
2's Complement HEX 7FFF 0000 0000
13 S Type Engineer Unit +1768.0 +00.000 +0000.0
% of FSR +100.00 +000.00 +000.00
2's Complement HEX 7FFF 0000 0000
14 B Type Engineer Unit +1820.0 +000.00 +0000.0
% of FSR +100.00 +000.00 +000.00
2's Complement HEX 7FFF 0000 0000
15 N Type Engineer Unit +1300.0 +000.00 -0270.0
% of FSR +100.00 +000.00 -020.77
2's Complement HEX 7FFF 0000 E56B
16 C Type Engineer Unit +2320.0 +00.000 +0000.0
% of FSR +100.00 +000.00 +000.00
2's Complement HEX 7FFF 0000 0000
17 L Type Engineer Unit +800.00 +00.000 -200.00
% of FSR +100.00 +000.00 -025.00
2's Complement HEX 7FFF 0000 E000
18 M Type Engineer Unit +100.00 +000.00 -200.00
% of FSR +050.00 +000.00 -100.00
2's Complement HEX 4000 0000 8000
19 L Type
DIN43710		 Engineer Unit +900.00 +000.00 -200.00
% of FSR +100.00 +000.00 -022.22
2's Complement HEX 7FFF 0000 E38F

Thermocouple Input Type Over/Under Range Response
Data Format Over Range Under Range
Engineer Unit +9999.9 -9999.9
% of FSR +9999.9 -9999.9
2's Complement HEX 7FFF 8000


Back to Previous Page

Type 1B to 1C Definition ( for I-87017ML )
Type Code Input Range Data Format Full Scale Zero Negative Full Scale
1B -150V to +150V
 Engineer Unit +150.00 +000.0000 -150.00
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000
1C -50V to +50V
 Engineer Unit +50.000 +00.0000 -50.000
% of FSR +100.00 +000.00 -100.00
2's Complement HEX 7FFF 0000 8000


Back to Previous Page



RTD Type Definition   ( for I-87013/ 87015 )
Type Code RTD Type Data Format Max Value Min Value
20

(default)		 Platinum 100
a = 0.00385
-100 to 100 degree Celsius		 Engineer Unit +100.00 -100.00
% of FSR +100.00 -100.00
2's complement HEX 7FFF 8000
Ohm +138.50 +060.25
21 Platinum 100
a = 0.00385
0 to 100 degree Celsius		 Engineer Unit +100.00 +000.00
% of FSR +100.00 +000.00
2's complement HEX 7FFF 0000
Ohm +138.50 +100.00
22 Platinum 100
a = 0.00385
0 to 200 degree Celsius		 Engineer Unit +200.00 +000.00
% of FSR +100.00 +000.00
2's complement HEX 7FFF 0000
Ohm +175.84 +100.00
23 Platinum 100
a = 0.00385
0 to 600 degree Celsius		 Engineer Unit +600.00 +000.00
% of FSR +100.00 +000.00
2's complement HEX 7FFF 0000
Ohm +313.59 +100.00
24 Platinum 100
a = 0.003916
-100 to 100 degree Celsius		 Engineer Unit +100.00 -100.00
% of FSR +100.00 -100.00
2's complement HEX 7FFF 8000
Ohm +139.16 +059.58
25 Platinum 100
a = 0.003916
0 to 100 degree Celsius		 Engineer Unit +100.00 +000.00
% of FSR +100.00 +000.00
2's complement HEX 7FFF 0000
Ohm +139.16 +100.00
26 Platinum 100
a = 0.003916
0 to 200 degree Celsius		 Engineer Unit +200.00 +000.00
% of FSR +100.00 +000.00
2's complement HEX 7FFF 0000
Ohm +177.13 +100.00
27 Platinum 100
a = 0.003916
0 to 600 degree Celsius		 Engineer Unit +600.00 +000.00
% of FSR +100.00 +000.00
2's complement HEX 7FFF 0000
Ohm +317.28 +100.00
28 Nickel 120
-80 to 100 degree Celsius		 Engineer Unit +100.00 -080.00
% of FSR +100.00 -080.00
2's complement HEX 7FFF 999A
Ohm +200.64 +120.60
29 Nickel 120
0 to 100 degree Celsius		 Engineer Unit +100.00 +000.00
% of FSR +100.00 +000.00
2's complement HEX 7FFF 0000
Ohm +200.64 +120.60
2A Platinum 1000
a = 0.00385
-200 to 600 degree Celsius		 Engineer Unit () +600.00 -200.00
% of FSR +100.00 -033.33
2's complement HEX 7FFF D556
Ohm +3137.1 +0185.2
2B*1 Cu 100
a = 0.00421
-20 to 150 degree Celsius		 Engineer Unit () +150.00 -020.00
% of FSR +100.00 -013.33
2's complement HEX 7FFF EEEF
Ohm +163.17 +091.56
2C*1  Cu 100
a = 0.00421
0 to 200 degree Celsius		 Engineer Unit () +200.00 -000.00
% of FSR +100.00 -000.00
2's complement HEX 7FFF 0000
Ohm +167.75 +090.34
2D*1  Cu 1000
a = 0.00421
-20 to 150 degree Celsius		 Engineer Unit () +150.00 -020.00
% of FSR +100.00 -013.33
2's complement HEX 7FFF EEEF
Ohm +1631.7 +0915.6
2E*2 Pt 100
a = 0.00385
-200 to +200 degree Celsius		 Engineer Unit () +200.00 -200.00
% of FSR +100.00 -100.00
2's complement HEX 7FFF 8000
Ohm +175.84 +018.49
2F*2 Pt 100
a = 0.003916
-200 to +200 degree Celsius		 Engineer Unit () +200.00 -200.00
% of FSR +100.00 -100.00
2's complement HEX 7FFF 8000
Ohm +177.14 +017.14
80*2 Pt 100
a = 0.00385
-200 to +600 degree Celsius		 Engineer Unit () +600.00 -200.00
% of FSR +100.00 -033.33
2's complement HEX 7FFF D556
Ohm +313.59 +018.49
81*2 Pt 100
a = 0.003916
-200 to +600 degree Celsius		 Engineer Unit () +600.00 -200.00
% of FSR +100.00 -033.33
2's complement HEX 7FFF D556
Ohm +317.28 +017.14

Note :
* 1: Type 2B, 2C and 2D are only available with I-87015.
* 2: Type 2E, 2F, 80 and 81 are only available with the I-87015 firmware version A1.10
       and later, I-87013 firmware version B1.3 and later.

RTD Input Type Over/Under Range Response
For I-87013
Data Format
Over Range
Under Range
Engineer Unit +9999 -0000
% of FSR +9999 -0000
2's Complement HEX 7FFF 8000
                                                             For I-87015
Data Format
Over Range
Under Range
Engineer Unit +9999.9 -9999.9
% of FSR +999.99 -999.99
2's Complement HEX 7FFF 8000

 


Back to Previous Page


  Thermistor Type Definition   ( for I-87005W/87015T )
60

Precon -- ST-A3
-30 to 240 degree Fahrenheit

 Engineer Unit +240.00 -030.00
% of FSR +100.00 -012.50
2's complement HEX 7FFF F000
Ohm +000539.4 +173600.0
61

Type u Fenwell
-50 to 150 degree Celsius

 Engineer Unit +150.00 -050.00
% of FSR +100.00 +000.00
2's complement HEX 7FFF D556
Ohm +000037.2 +134020.0
62

Type u Fenwell
0 to 150 degree Celsius

 Engineer Unit +150.00 -000.00
% of FSR +100.00 +000.00
2's complement HEX 7FFF 0000
Ohm +000037.2 +006530.0
63
 YSI L Mix 100
 Engineer Unit +100.00
 -080.00
% of FSR +100.00
 -080.00
2's complement HEX 7FFF
 999A
Ohm +000014.3
 +014470.0
64
 YSI L Mix 300
 Engineer Unit +100.00
 -080.00
% of FSR +100.00
 -080.00
2's complement HEX 7FFF
 999A
Ohm +000035.8
 +067660.0
65
 YSI L Mix 1000
 Engineer Unit +100.00 -070.00
% of FSR +100.00 -070.00
2's complement HEX 7FFF A667
Ohm +000106.4
 +132600.0
66
 YSI B Mix 2252
 Engineer Unit +150.00
 -050.00
% of FSR +100.00
 -033.33
2's complement HEX 7FFF
 D556
Ohm +000041.8
 +151000.0
67
 YSI B Mix 3000
 Engineer Unit +150.00
 -040.00
% of FSR +100.00
 -026.67
2's complement HEX 7FFF
 DDDE
Ohm +000055.6
 +101000.0
68
 YSI B Mix 5000
 Engineer Unit +150.00
 -040.00
% of FSR +100.00
 -026.67
2's complement HEX 7FFF
 DDDE
Ohm +000092.7
 +168300.0
69
 YSI B Mix 6000
 Engineer Unit +150.00
 -030.00
% of FSR +100.00
 -20.00
2's complement HEX 7FFF
 E667
Ohm +000111.5
 +106200.0
6A
 YSI B Mix 10K
 Engineer Unit +150.00
 -030.00
% of FSR +100.00
 -020.00
2's complement HEX 7FFF
 E667
Ohm +000185.9
 +177000.0
6B
 YSI H Mix 10K
 Engineer Unit +150.00
 -030.00
% of FSR +100.00 -020.00
2's complement HEX 7FFF E667
Ohm +000237.0
 +135200.0
6C
 YSI H Mix 30K
 Engineer Unit +200.00
 -010.00
% of FSR +100.00 -005.00
2's complement HEX 7FFF F99A
Ohm +000186.7
 +158000.0
70 ~ 77
 User-defined
-50 to 150 degree Celsius 		Engineer Unit +150.00
 -050.00
% of FSR +100.00
 -33.33
2's complement HEX 7FFF
 D556
Ohm +000000.0
 +000000.0

 

Thermistor Input Type Over/Under Range Response ( for I-87015T )
Data Format
Over Range
Under Range
Engineer Unit +999.99 -999.99
% of FSR +999.99 -999.99
2's Complement HEX 7FFF 8000

 


Back to Previous Page


I-87024 Analog Output Type Definition
Type Code Output Range Data Format Max Value Min Value
30 0 to 20mA Engineer Unit +20.000 +00.000
31 4 to 20mA Engineer Unit +20.000 +04.000
32 0 to 10V Engineer Unit +10.000 +00.000
33 -10 to 10V Engineer Unit +10.000 -10.000
34 0 to 5V Engineer Unit +05.000 +00.000
35 -5 to 5V Engineer Unit +05.000 -05.000

Back to Previous Page

 

I-87022 Analog Output Type Definition (T)
Type Code Output Range Data Format Max Value Min Value
0 0 to 20mA Engineer Unit 20.000 00.000
% of FSR +100.00 +000.00
Hexadecimal FFF 000
1 4 to 20mA Engineer Unit 20.000 04.000
% of FSR +100.00 +000.00
Hexadecimal FFF 000
2 0 to 10V Engineer Unit 10.000 00.000
% of FSR +100.00 +000.00
Hexadecimal FFF 000


Back to Previous Page

 

I-87026 Analog Output Type Definition (T)
Type Code Output Range Data Format Max Value Min Value
0 0 to 20mA Engineer Unit 20.000 00.000
% of FSR +100.00 +000.00
Hexadecimal FFFF 0000
1 4 to 20mA Engineer Unit 20.000 04.000
% of FSR +100.00 +000.00
Hexadecimal FFFF 0000
2 0 to 10V Engineer Unit 10.000 00.000
% of FSR +100.00 +000.00
Hexadecimal FFFF 0000


Back to Previous Page

 

I-87024C/I-87028C Analog Output Type Definition (T)
Type Code Output Range Data Format Max Value Min Value
0 0 to 20mA Engineer Unit +20.000 +00.000
% of FSR +100.00 +000.00
Hexadecimal FFF 000
1 4 to 20mA Engineer Unit +20.000 +04.000
% of FSR +100.00 +000.00
Hexadecimal FFF 000


Back to Previous Page


I-87024UW/I-87028UW Analog Output Type Definition (T)

Type
Code
 Output Range
 Data Format
 Max Value
 Min Value
0
 0 to 20mA
 Engineer Unit
 +20.000
 +00.000
% of FSR
 +100.00
 +000.00
Hexadecimal
 FFFF 0000
1
 4 to 20mA
 Engineer Unit +20.000 +04.000
% of FSR +100.00 +000.00
Hexadecimal FFFF
 0000
2
 0 to 10V
 Engineer Unit +10.000 +00.000
% of FSR +100.00 +000.00
Hexadecimal FFFF 0000
3
 -10 to 10V
 Engineer Unit +10.000 -10.000
% of FSR +100.00 -100.00
Hexadecimal 7FFF 8000
4 0 to 5V
 Engineer Unit +05.000
 +00.000
% of FSR +100.00 +00.000
Hexadecimal FFFF
 0000
5
 -5 to 5V
 Engineer Unit +05.000
 -05.000
% of FSR +100.00
 -100.00
Hexadecimal 7FFF
 8000


Back to Previous Page


I-87022, I-87026, I-87024C, and I-87028C Slew Rate Control Definition (S)

 Slew Rate Control Code
( For I-87022/26/24C/28C )		   0 = Immediate output
 1 = 0.0625V/Second or 0.125mA/Second
 2 = 0.125V/Second or 0.25mA/Second
 3 = 0.25V/Second or 0.5mA/Second
 4 = 0.5V/Second or 1.0mA/Second
 5 = 1.0V/Second or 2.0mA/Second
 6 = 2.0V/Second or 4.0mA/Second
 7 = 4.0V/Second or 8.0mA/Second
 8 = 8.0V/Second or 16.0mA/Second
 9 = 16.0V/Second or 32.0mA/Second
 A = 32.0V/Second or 64.0mA/Second
 B = 64.0V/Second or 128.0mA/Second
 C = 128.0V/Second or 256.0mA/Second
 D = 256.0V/Second or 512.0mA/Second
 E = 512.0V/Second or 1024.0mA/Second


Back to Previous Page


Digital Input/Output Type Definition
Type Code Description
40 Digital Input/Output



Counter/Frequency Type Definition ( for I-87082 )
Type Code Description
50 (default) Counter Mode
51 Frequency Measurement


Counter/Frequency/Encoder Type Definition ( for I-87084W )
Type Code Description
50 (default) Up Counter Mode
51 Frequency Measurement
54
 Up/Down Counter Mode
55
 Pulse Mode
56
 AB Phase Mode




Back to Previous Page Last Modified 10/30/2008 13:33:36