| Command |
~AAZOCi(Data) |
| Description |
Set Zero Offset
|
| Syntax |
~AAZOCi(Data)[CHK](cr)
| ~ |
a delimiter character |
| AA |
address of setting module (00 to FF) |
ZO
|
command for setting zero offset value
|
Ci
|
Specifies channel |
| (Data)
|
zero offset values, data format is in engineer unit format
|
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AA[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command. |
| AA |
address of response module (00 to FF) |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
~01ZOCi+0.0150 |
| Response |
!01
|
| Description |
Set address 01 zero offset +0.0150, return success.
|
|
| Reference |
|
|