Command |
@AAAV |
Description |
Set Linear Mapping Status |
Syntax |
@AAAV[CHK](cr)
@ |
a delimiter character |
AA |
address of setting module (00 to FF) |
A
|
command for enable/disable linear mapping
|
V |
Bit 0 is channel 0, Bit 1 is channel 1.
0=disable linear mapping, 1=enable linear mapping |
[CHK] |
2 characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of command |
|
Response |
Valid Command |
!AAV[CHK](cr) |
Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
! |
delimiter for valid command |
? |
delimiter for invalid command. |
AA |
address of response module (00 to FF) |
[CHK] |
2 characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of response |
|
Example |
Command |
@01A3 |
Response |
!01 |
Description |
enable channel 0 and channel 1of address 01 linear mapping, return success.
|
|
Reference |
|
|