| Command |
@AA7Ci(TL)(TH) |
| Description |
Set Lower and Upper Target Limit of Linear Mapping
|
| Syntax |
@AA7Ci(TL)(TH)[CHK](cr)
| @ |
a delimiter character |
| AA |
address of setting module (00 to FF) |
| 7 |
command for clearing latch alarm |
Ci
|
Specifies channel
|
(SL)
|
source low level value in engineer unit format
|
(SH)
|
source high level value in engineer unit format
|
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AA[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command. |
| AA |
address of response module (00 to FF) |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
@017C0-2.5000+2.5000 |
| Response |
!01 |
| Description |
Set channel 0 of address 01 target value -2.5 to +2.5, return success |
|
| Reference |
|
|