| Command |
~AAEV |
| Description |
Enable/Disable calibration |
| Syntax |
~AAEV[CHK](cr)
| ~ |
a delimiter character |
| AA |
address of setting module (00 to FF) |
| E |
command for enable/disable calibration |
| V |
1 = enable calibration
0 = disable calibration |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AA[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command. |
| AA |
address of response module (00 to FF) |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
~01E1 |
| Response |
!01 |
| Description |
Enable calibration to module of address 01, response success |
|
| Reference |
$AA0
$AA1
Calibration
|
|