| Command |
$AA9N |
| Description |
Readback current output value of specificed output channel |
| Syntax |
$AA9N[CHK](cr)
| $ |
a delimiter character |
| AA |
address of reading module (00 to FF) |
| 9 |
command for read DA configuration of channel N
|
| N |
specificed channel for read current output value |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AATS[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command. |
| AA |
address of response module (00 to FF) |
| T |
analog output type. |
| S |
analog output slewrate. |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
$0190 |
| Response |
!0110 |
| Description |
Read DA configuration of channel 0 of address 01 ,
return 4 to 20mA output and change imediate. |
|
| Reference |
$AA9NTS |
|