| Command |
$AA5 |
| Description |
Read reset status |
| Syntax |
$AA5[CHK](cr)
| $ |
a delimiter character |
| AA |
address of reading module (00 to FF) |
| 5 |
command for read status |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AAS[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command. |
| AA |
address of response module (00 to FF) |
| S |
reset status
1 = the module is been reseted, and the status is reset to 0 after read
0 = the module is not been reseted |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
$015 |
| Response |
!011 |
| Description |
Read reset status of address 1, response the module is reseted before read. |
|
| Command |
$015 |
| Response |
!010 |
| Description |
Read reset status of address 1 again, response the module is not reseted before read. |
|
| Reference |
|
|