| Command |
$AA4N |
| Description |
Set PowerOn Value of specificed output channel |
| Syntax |
$AA4N[CHK](cr)
| $ |
a delimiter character |
| AA |
Address of setting module (00 to FF) |
| 4 |
Command for set PowerOn Value
|
| N |
Specificed channel for set PowerOn Value |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AA[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command. |
| AA |
address of response module (00 to FF) |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
#012+00.000 |
| Response |
> |
| Description |
Set address 01 channel 2 output 0.0, response success.
( for I-87024 ) |
| Command |
$0142 |
| Response |
!01 |
| Description |
Set PowerOn Value of channel 2 of address 01, response success.
( for I-87024 ) |
|
| Reference |
#AAN(Data)
$AA7N
|
|