I-87018ZW Specification

Analog Input	Input Channel	10 differential input channels
	Input Type	+/- 15mV, +/- 50mV, +/- 100mV +/- 500mV, +/- 1V, +/- 2.5V +/- 20mA (with external 125 Ohms resistor) Thermocouple : J, K, T, E, R, S, B, N, C, L, M, L2
	Sampling Rate	10 samples/second total
	-3 dB BandWidth	15.7 Hz
	Accuracy	+/-0.1%
	Common Mode Rejection	150dB @50/60 Hz
	Normal Mode Rejection	100dB @50/60Hz
	Voltage Input Impedance	20 MOhm
	Overvoltage Protection	+/-240 Vrms maximum
	Open T/C Detection	Yes
	Individual Channal Config.	Yes
	+/- 4 kV ESD Protection	Yes
	Intra-module Isolation	3000Vrms
LED Display	1 LED as Power/Communication indicator
Power Consumption	Maximum : 1.3 W

I-87018ZW with DB-1820 Pin Assignment

I-87018ZW Pin Assignment DB-1820 Pin Assignment

I-87018ZW Block Diagram

I-87018ZW with DB-1820 Wire Connection

Voltage Input Wiring
Current Input Wiring	Note: When connecting to a current source, an optional external 125-Ohm resistor is required.
Thermocouple Input Wiring

I-87018ZW with DB-1820 Dimention

I-87018ZW Default Setting

Configuration	Default Setting	Description
Type	05	-2.5V to +2.5V
Baudrate	0A	115200 bps
Format	00	60Hz rejection CheckSum disable Engineer Unit Format

Back to Previous Page