*********************
VB6_Demo5 program
*********************

Copyright Feb. 2007 by ICP DAS CO., LTD. All right reserved.

---------------------------------------------------------------------------------
This demo show how to use PC to access to the Wincon-8x47 + slot2: 8024 + slot3: 8017h via Modbus TCP/IP protocol.
---------------------------------------------------------------------------------

This VB6_demo5 includes 2 parts.

1. VB6 source code : workspace name is "Demo_5.vbp" at
  W-8xx7 CD-ROM:  \napdos\isagraf\wincon\vb6_demo_pc\   or
  ftp://ftp.icpdas.com.tw/pub/cd/wincon_isagraf/napdos/isagraf/wincon/vb6_demo_pc/


2. ISaGRAF program : project name is "Whmi_13.pia"
  W-8xx7 CD-ROM:  \napdos\isagraf\wincon\demo\   or
  ftp://ftp.icpdas.com.tw/pub/cd/wincon_isagraf/napdos/isagraf/wincon/demo/


Operation note:  
  Please refer to manual at 

Controller side:

1. Please install one i-8024 I/O board to W-8xx7's slot 2 and one i-8017h board to slot 3. 
   And wire i-8024's Voltage output Ch.1 to i-8017H's Voltage input Ch. 1 ,  ... , Ch.4 to Ch.4
2. Please restore the "whmi_13.pia" to your ISaGRAF and then download it to W-8xx7. 
   (IP of this W-8xx7 in this demo should be 10.0.0.103  , NET-ID should be 1). 

PC side:
Please run Demo_5.exe.

Support:  service@icpdas.com

by chun on Feb.26,2007