Introduction

The DCON Utility is a tool kits that help user search the network , easily to Configure the I/O
modules and test the I/O status via the serial port(RS-232/485) or ethernet port (using virtual com port).
It support not only the DCON Protocol I/O modules but also the M Series I/O Moudles
( Modbus RTU M-7K,M-87K and will support Modbus ASCII M-87K) now.

The main function of DCON Utility are list below:

• COM Port : Configuration and setting for PC COM Port
  
  
  
  
  　

• Search Network : Show modules on data bus
  
  
  
  　

• Run Monitoring  : Utility will monitor network modules' I/O status every running cycle
  
  
  
  　

• Run Data Logger : Utility use customized parameters to monitor the I/O modules and will make a log file for I/O data.
  
  
  
  
  　

• Terminal   : for some situation users would want to use command to test module's function directly.

	DCON_Labview Bundled driver for Labview Module supported: I-7000/8000/87K series (with DCON protocol) OS supported: Windows 98/NT/2000/XP
	DCON_Indusoft Bundled driver for Indusoft Module supported: I-7000/8000/87K series (with DCON protocol) OS supported: Windows 98/NT/2000/XP/CE
	DCON_DLL DLL library Module supported: I-7000/8000/87K series (with DCON protocol) Demo supported: VB/VC/BCB/Delphi (Source code included) OS supported: Windows 98/NT/2000/XP
	DCON_ActiveX ActiveX (OCX) component Module supported: I-7000/8000/87K series (with DCON protocol) Demo supported: VB/VC/BCB/Delphi (Source code included) OS supported: Windows 98/NT/2000/XP
	DCON_Linux Libraries for Linux platform Module supported: I-7000/8000/87K series (with DCON protocol) OS supported: Linux
	DCON_DDE DDE server Module supported: I-7000/8000/87K series (with DCON protocol) OS supported: Windows 98/NT/2000/XP
	NAPOPC Server OPC server Module/Controller supported: I-7000/8000/87K series (with DCON protocol) Modbus embedded controller ISaGRAF embedded controller OS supported: Windows 98/NT/2000/XP