/****************************************************************************/
/* PIO-DIO DLL Driver and OCX(ActiveX) Control 		                    */
/* for Windows 2000/XP/2003ĦB98ĦB NT                                        */
/*                                                             		    */
/* Version : 2.14                                    		            */
/* Update  : May-23-2013                          		            */
/*                                                                  	    */
/* Support : PIO-D168/D168U, PIO-D144/D144U, PIO-D96/D96U, PIO-D64/D64U,    */
/*           PIO-D56/D56U,  PIO-D48/D48U,  PIO-D24/D24U, PEX-D24/D56/D48    */
/****************************************************************************/

A. The default installation folder is 
   system for WINDOWS 2000/XP/2003 is C:\DAQPro\PIO-DIO_Win2K
   system for WINDOWS 98 is C:\DAQPro\PIO-DIO_Win98
   system for WINDOWS NT is C:\DAQPro\PIO-DIO_WinNT 
      
B. It's recommended to install the software before plug PIO-DIO series cards
   into the computer. This reduces the Windows Plug & Play procedures.
     
     1. Run the setup program to install.
     2. Power-off your computer.
     3. Plug the PIO-DIO series cards into the computer.
     4. Re-start the computer and finish the Windows PnP.
     
   Usually, Windows 2000 will finish the PnP procedures automatically.
   If Windows still asking the Inf files for PnP, please specify the
   "C:\DAQPro\PIO-DIO_Win2K\Driver" (depends on your installation) 
   folder to finish it.

   If Windows still asking the Inf files for PnP, please specify the
   "C:\DAQPro\PIO-DIO_Win98\Driver" (depends on your installation) 
   folder to finish it.

C. For more information please refer to:
   
   CD:\NAPDOS\PCI\PIO-DIO\Manual           (Hardware manual)
   CD:\NAPDOS\PCI\PIO-DIO\DLL_OCX\Demo     (Sample programs)
   CD:\NAPDOS\PCI\Manual                   (Related documents)

Note: It will return PIODIO_DriverOpenError under Windows 2000 when the 
      driver found no devices on the system.

Note: The PCI/PIO/PISO Series Cards must set it's Information-file 
      correctlly  under Windows 9x/2000/XP/2003 before users controlling 
      or accessing these cards. For the detailed information, please 
      refer to 
      CD:\NAPDOS\PCI\Manual\PCI_ISA_PnP_Driver_Installation_in_Win9x_2K_XP.pdf

Note: The manual is written in PDF format, users may need to free 
      download the Adobe Arcobat Reader at
      http://www.adobe.com/prodindex/acrobat/readstep.html
      or
      CD:\NAPDOS\Adobe_Reader