/****************************************************************/
/*                                                              */
/*  A8111 Development Toolkit                                   */
/*  for LabVIEW Windows 95/98                                   */
/*                                                              */
/*  Version :                                                   */
/*  Date    : Nov-30-1999                                       */
/*                                                              */
/*                                                              */
/*  For LabVIEW Win95/98 User to install the A8111 Toolkit     */
/****************************************************************/

Note : There has some error descriptions in hardware manual.

    Page 13. 
	A-8111 GAIN CONTROL CODE TABLE
	Error : 
		GAIN  8:  +0.0625v ~ -0.0625v
		GAIN 16: +0.03125v ~ -0.03125v
	Correct :
		GAIN  8:  +0.625v ~ -0.625v
		GAIN 16: +0.3125v ~ -0.3125v

    Page 25.
	2.10 Pin Assignments
	CN1: Analog input/Analog output/Connector Pin Assignment
	  Error : 
		CN1.Pin9 : Analog GND
		CN1.Pin10: Analog GND
		CN1.Pin28: Analog GND
		CN1.Pin29: Analog GND
	  Correct :
		CN1.Pin9 : Not Used
		CN1.Pin10: Not Used
		CN1.Pin28: Not Used
		CN1.Pin29: Not Used
/**********************************************************************/

The READNE.TXT contains the newset information for A8111.
Please reading this file before install. 


 A). The contents in this disk are valid for A8111.


 B). to run 

	  A:\SETUP\SETUP.EXE 
     or   [DriveLetter]:[\SetupProgramPath]\SETUP.EXE 

     to install LabVIEW driver for A8111.
     (please enter the path according to your environment)
  


 C). After installed, 
    
     the A8111.dll and A8111.vxd
     will be copied into C:\Windows\SYSTEM 


     The item "DAQPro A8111 LV95" will be added 
     into the "Add/Remove Programs" (under "Control Panel") 
    


 D). After installed, the directories as follows:
    
     The default [Base Directory] is "\DAQPro\A8111 LV95".
 
     [Base Directory]           <-- the directory you selected to setup
	|--\Demos               <-- Demo Code for Labview 4.0
        |   |--\demo1.vi        <-- DI/DO, A/D, Interrupt DEMO 
	|	
        |--\Driver 
        |   |--\A8111.dll       <-- dynamic linking library
        |   +--\A8111.VXD       <-- device driver
	|
	|--\Manual
	|   |--\A8111sof.pdf    <-- The software manual for A8111
	|   |--\ResCheck.pdf    <-- How to check the resoures 
        |   |                       under Windows 95/98/NT
	|   +--\LVCallDll.pdf   <-- How to call the DLL functions 
        |                           with LabVIEW. 
        |
	+-\readme.txt           <-- this file.

      


 E). After installed, the following links will be add into the "Start Menu".
    
     [Start]    <-- the Start menu
      |--\Programs
          |--\DAQPro     
              +--\A8111 LV95               <-- link to the "A8111 LV95" folder
              

 
 
Note: The manual is written in PDF format,
      the user may need to free download the Adobe Arcobat Reader at
      http://www.adobe.com/prodindex/acrobat/readstep.html