Users can download the firmware into the CAN-8424 as following steps:

1.	Power-off the CAN-8424

2.	Rotate the DR switch to '9'

3.	Install the download cable between COM1 of the CAN-8424 & COM1 of PC 

4.	Power-up the CAN-8424 & Run 7188xw.EXE

5.	Then press F4 button to load firmware automatically.

	PS: the firmware files are "DN_44XXX" and "autoexec.bat".
 	    These two files and the 7188xw.exe must be in same directory.

6.	Rotate the DR switch to the necessary DeviceNet baudrate

7.	Then Key-in “reset” to restart the CAN-8424

8.	Pressing Alt & X at the same time will quit the 7188xw.EXE