| Command |
@AA(Data) |
| Description |
Set digital outputs |
| Syntax |
@AA(Data)[CHK](cr)
| @ |
a delimiter character |
| AA |
address of setting module (00 to FF) |
| (Data) |
digital output value |
| Total Output Channels of Module |
(Data) |
| less than 4 channels |
0 to F |
| 5 to 8 channels |
00 to FF |
| 9 to 16 channels |
0000 to FFFF |
| 17 to 32 channels |
00000000 to
FFFFFFFF |
|
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
>[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| > |
delimiter for valid command |
| ? |
delimiter for invalid command. |
| AA |
address of response module (00 to FF) |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
@010000 |
| Response |
> |
| Description |
Set digital output to 0000 of address 01, response success. |
|
| Reference |
@AA
#AABBDD
$AA6
|
|