| Command |
$AA1N |
| Description |
I-87022/26/24C/28C :
Perform 20mA calibration for specificed output channel
I-87024 :
Perform 20mA/+10V calibration for specificed output channel |
| Syntax |
$AA1N[CHK](cr)
| $ |
a delimiter character |
| AA |
Address of setting module (00 to FF) |
| 1 |
Command for performing calibration
For I-87024 :
Type = 30, perform 20mA calibration
Type = 32, perform +10V calibration. |
| N |
Specificed channel for calibration |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AA[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command. |
| AA |
address of response module (00 to FF) |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
$0111 |
| Response |
!01 |
| Description |
I-8722/26 :
Perform 20mA calibation of channel 1 of address 01, response success.
I-87-24 :
Perform 20mA(or +10V) calibation of channel 1 of address 01, response
success. |
|
| Reference |
$AA0N
|
|