IxVCOM - Linux Virtual COM Package for PDS/7188En series.

1. Introduction

   The purpose of this driver is to map PDS/7188En serial port to host tty
   port. Using the driver, you can use remote serial port as local tty port.

2. System Requirement
   
   Linux kernel 2.6.25 or above and the kernel source package
ƒÞ [1]gcc-4.4.2 or above
ƒÞ [2]libc.so-6 or above
ƒÞ [3]binutils-2.19.0 or above
ƒÞ [4]make-3.81 or above

3. Install Linux VxComm Driver

   [1]The root privilege is required when installing or removing these kernel modules.
   [2]go to your project directory with rw privilege.
   [3]extract package into current directory.

      tar -zxvf ixvcom.tar.gz

   [4]Configure to create proper Makefiles.

      ./configure

   [5]make to build all.

      make

   [6]Install/Uninstall

      Script ./ixvcom.inst loads "ixvcom" modules and "ixvcomd.cf" file automatically.
      Script ./ixvcom.remove removes the loaded "ixvcom" modules and "ixvcomd.cf" file.

4. Mapping/Removing TTY Ports

   [1]Use tool "addserver" to map tty ports automatically

      ./addserver [Device IP] [Total Ports] (ex device PDS-782 "./addserver 10.1.0.13 8")     
   [2]Use tool "delserver" to remove tty ports automatically
     
      ./delserver [Device IP]	
   
About detail information, please refer to the manual "VxComm_Linux_User's_Manual_v1.0.pdf".