/**************************************************************/
/*                                                            */
/*  PCI-1002 LabVIEW 8.5 Development Toolkit                  */
/*                                                            */
/*  Version : 3.03                                            */
/*  Update  : May 2009                                        */
/*  Support OS : WinXP/ VISTA (32-bit)                        */
/*                                                            */
/**************************************************************/

Installation steps:

1.Install the driver for PCI-1002
 (CD:\OMEGA\PCI\PCI-1002\DLL_OCX\Driver)

2.Power-off the PC, plug in the card and then power-on the PC.

3.Install the LabVIEW 8.5 toolkit

4.Run \Diag\DIO.exe to check whether the card and driver are installed correct.

5.Refer to the demo programs and get the description of sub-vis
  from "OME_PCI_1002_Software_Manual.pdf" in 
  CD:\OMEGA\PCI\PCI-1002\Manual.


About the LabVIEW 8.5 toolkit:

  a. The default path to install is c:\OMEGA\pci_1002_lv85
  b. The toolkit includes demo programs, P1002.llb, kernel32.llb and this readme.txt.