/********************************************************************************/
/*                                                                        	    */
/* PISO-Encoder300/600 Development Toolkit                                      */
/* for Windows NT                                                    	          */
/*                                                                        	    */
/* Version : 2.0                                                     	          */
/* Ddate   : Apil-27-2005                                                  	    */
/*                                                                        	    */
/* Support : PISO-Encoder300/600                                                */
/*                                                                        	    */
/* For WINDOWS 2000 User to install the PISO-Encoder300/600 Development Toolkit */
/*                                                                        	    */
/********************************************************************************/
/*	This content is valid only for WINDOWS NT	                  	              */
/********************************************************************************/


 A). The Disk Contents:

  |--\README.TXT       <-- This file.
  |
  |--\SETUP            <-- sub-directory
        |--\SETUP.EXE  <-- the Setup program
      

 B). Installation Steps

   B-1). Installing software
       Step 1. Insert the CD into CD-ROM drive (for example: "D:").
       Step 2. Click the "Start/Run" menu item in the task Bar.
       Step 3. enter the path as:          (if CD-ROM drive is D:)
               D:\NAPDOS\Motion\PISO-Encoder\WinNT\Setup\SETUP.EXE  
       Step 4. Follow those instructions in installation process 
               to complete it.

   B-2). Installing hardware
       Step 1. Shutdown and power off your computer.
       Step 2. Plug the PISO-Encoder300/600 in the PCI slot.
       Step 3. Power on your computer.


 C). After installation,
   1.)	
    for Win2XP 		
     The enc600.dl will be copied into C:\WINDOWS\system32
     The Napwnt.sys will be copied into C:\WINDOWS\system32\DRIVERS
    for Win2000 		
     The enc600.dl will be copied into C:\WINNT\system32
     The Napwnt.sys will be copied into C:\WINNT\system32\DRIVERS
    for Win2000 		
     The enc600.dl will be copied into C:\WINNT\system32
     The Napwnt.sys will be copied into C:\WINNT\system32\DRIVERS

   2.)
     Following registry key and value will be created ......
     HKEY_LOCAL_MACHINE:
	 system\CurrentControlSet\Services\Napwnt\ErrorControl=0x00000001
	 system\CurrentControlSet\Services\Napwnt\Start=0x00000002
	 system\CurrentControlSet\Services\Napwnt\Type=0x00000001
   3.)
     The item "DAQPro PISO-Encoder WinNT/2000/XP" will be added 
     into the "Add/Remove Programs" (under "Control Panel") 

    
 D). The sub-directory tree is as follows:

     The default [Base Directory] is "\DAQPro\PISO_Encoder_WinNT.2000.XP".

   [Base Directory] <-- the directory you selected to install
    |
    |--\Demo                   <-- Demo Programs
    |   |--\BCB3               <-- Demo  program for Borland C++ Builder 3.0
    |   |--\Delphi3            <-- Demo  program for Delphi 3.0
    |   +--\VB5                <-- Demo  program for Visual Basic 5.0
    |
    |--\Driver                 <-- some device driver
    |   |--\ENC600.dll         <-- Dynamic Linking Library
    |   |--\Napwnt.sys         <-- Kernel mode device driver
    |   |--\RegDrv.bat         <-- Driver registration file
    |   |
    |   |--\BCB3               <-- for Borland C++ Builder 3
    |   |   |--\ENC600.h       <-- Header file
    |   |   +--\bcENC600.lib   <-- Linkage library for BCB3 only
    |   |--\Delphi3            <-- for Delphi 3
    |   |   +--\ENC600.pas     <-- Declaration file
    |   |--\VB5                <-- for Visual Basic 5
    |   |   +--\ENC600.Bas     <-- Declaration file
    |   +--\VC5                <-- for Visual C++ 5
    |       |--\ENC600.h       <-- Header file
    |       +--\ENC600.lib     <-- Linkage library for VC5 only
    |
    |--\Diag
    |   |--\PIOPISO.DLL        <-- for PIO_PISO.EXE
    |   +--\PIO_PISO.EXE       <-- Utility for PIO/PISO series card
    |                              to show the SubVenderID, SubDeviceID, SubAux
    |
    |--\Manual
    |   |--\CallDLL.PDF        <-- Call the DLL functions 
    |   |                          with VC++5.0, VB5.0, Delphi3.0 
    |   |                          and Borland C++ Builder 3.0.
    |   |--\ResCheck.PDF       <-- Check the resoures 
    |   |                          under Windows 95/98/2000
    |   |--\SoftInstall.pdf    <-- Installation Guide for software.
    |   |                    
    |   +--\Enc600.pdf          <-- PISO-Encoder300/600 hardware manual and
    |                               software manual                               
    |
    +--\README.TXT             <-- this file.


 E). After installed, the following links will be add into the "Start Menu".
    
   [Start]    <-- the Start menu
    +--\Programs
        +--\DAQPro     
            +--\PISO_Encoder_WinNT.2000.XP          <-- link to the PISO-Encoder300/600 NT/2000/XP folder


Note: The manual is written in PDF format,
      the user may need to free download the Adobe Arcobat Reader at
      http://www.adobe.com/prodindex/acrobat/readstep.html