[ModView 1.03 2005/09/09 Released]

CD-ROM
/ROOT

Setup.exe   ModView message editor 1.0.2

......../Bin	DLite 1.6.69 firmware

......../PDF  All ModView documents
	
......./Samples  Client sample and ocx based messages upload/download sample for ModView
	

==============================================

How to Deploy ModView 1.0.3 firmware into EKAN ME 100M

1. Turn EKAN power off, Switch init switch to init Mode
2. Start 7188 xw program
3. Turn EKAN Power On
4. using "del ." or "delb ."  to delete all files on EKAN flash disk
5. using " disksize 2 5 " to partition flash disk
6. uisng "loadb" load 5 files into flash disk B

@ autoexec.bat
@ modview.exe
@ asc5x7.fnt
@ asc8x15.fnt
@ index.htm

7. using "dir" to see files if succeed
8. set "time" "date" "IP" "Mask" "Gateway" and using "Time init" for clock init if needed
9. Turn of EKAN power, Switch back to run mode
10. Restart System, you will see Input registration code message on the 7188xw screen
11. Input the registration provided by ICPDAS
12. You you see default system message if successful 


================================================
================================================

Release Note

[ModView 1.03 2005/9/9 Released]

EKAN firmware Version ver 1.0.3
DLite Message Editor ver 1.0.2
xMVFT.ocx ver 1.0.0.1


Changes List:

All install files in the one setup package
Firmware fix float variable and boolean variable setting function under MODBUS TCP mode
Modify Demo.mvp Demo files for better demo function
Message editor add connection IP information on the TCP tester page