================================================================================ 
    MiniOS7 Ver. 2 for I-7188XB
================================================================================ 
Ver. 2.0.2 
[2005/07/01]
1.Fixed: Using new method to detect the reset mode for RDC CPU.
  (The early version may detect a wrong result for POWER ON reset to WDT reset.) 

[2005/08/08]
1.Add the "crlf mode" to the command "use com" for test 752N modules. 

--------------------------------------------------------------------------------
Ver. 2.0.3 
[2006/06/14] 
OS image file name: "7188xb_CR_20060614.img"
1. Modify: Set when WDT timeout occures to generate an NMI interrupt.
2. This version and later can be used on the I-7188XA RoHS version. 

--------------------------------------------------------------------------------
Ver. 2.0.4 
[2006/09/21] 
OS image file name: "7188xb_CR_20060921.img"
1. Modify the code for ISR of WDT NMI to make the system more stable.

--------------------------------------------------------------------------------
Ver. 2.0.5 
[2006/12/07] 
OS image file name: "7188xb_CR_20061207.img"
1.Modify: After reset, disable all interrupt first then do other thing. 

--------------------------------------------------------------------------------
Ver. 2.0.6 
[2007/01/09] 
OS image file name: "7188xb_CR_20070109.img"
1.Modify: Before reset(Soft reset or WDT reset), disable all interrupt and disable 
  all timer.
2.Add command "Alias"
3.Modify the data format for the password value.   

--------------------------------------------------------------------------------
Ver. 2.0.7 
[2007/03/01] 
OS image file name: "7188xb_CR_20070301.img"
1.Fiexd: The problem that the WDT reset may cause the COM1 can not send out any data.

================================================================================ 
[Chinese Big5]------------------------------------------------------------------

== [快速更新 OS 的方法] ======================================================== 
1.把 7188XW.F4 跟 OS 的 IMAGE 檔解壓縮到硬碟的某個目錄。
2.在該目錄執行 7188XW.EXE。 
3.使用 7188xw.exe (V. 1.27 [2004/10/19] 或是以後的版本) 連上 I-7188E 之後， 
  按下鍵盤上的 [F4] 按鍵，7188XW.EXE 就會自動完成更新 OS 的動作。 

== [改版說明] ================================================================== 
Ver. 2.0.2 
[2005/07/01]
1.修正：使用 RDC CPU 時，修改 RESET MODE 的判斷方式。
  (以前的方式可能會把 POWER ON reset 誤判為 WDT reset)

[2005/08/08]
1."use com" 加上 crlf mode，以便配合測試 752N。 

--------------------------------------------------------------------------------
Ver. 2.0.3 
[2006/06/14] 
OS image 檔名: "7188xb_CR_20060614.img"
1. 修改 WDT RESET 的處理方式。
2. 修改相容於 RoHS 版本。 

Ver. 2.0.4 
[2006/09/21] 
OS image 檔名: "7188xb_CR_20060921.img"
1. 修改 WDT RESET 的處理方式(測試)。

Ver. 2.0.5 
[2006/12/07] 
OS image 檔名: "7188xb_CR_20061207.img"
1.修改：開機後先把所有中斷 disable 之後再繼續處理其他事項。 

Ver. 2.0.6
[2007/01/09] 
OS image 檔名: "7188xb_CR_20070109.img"
1.修改：reset 之前先所有中斷 disable 以及 timer 也 disable 。
2.加上 alias 命令。
3.password 設定的儲存使用新的方式處理。

Ver. 2.0.7
[2007/03/01] 
OS image 檔名: "7188xb_CR_20070301.img"
1.修正 WDT reset 可能造成 COM1 無法正常輸出的問題。

================================================================================