================================================================================ 
    MiniOS7 Ver. 2 for I-7188XC/7521/7522/7523
================================================================================ 
Ver. 2.0.2 
[2005/06/28]
1.Fixed: Using new method to detect the reset mode for RDC CPU.
  (The early version may detect a wrong result for POWER ON reset to WDT reset.) 

Ver. 2.0.3
[2005/11/25] 
OS image file name: "7188xc-20051125.img"
1. Add support INT 0x10 for the function Print() using the library Version 1.0 also can work.

Ver. 2.0.4
[2006/12/08] 
OS image file name: "7188xc-20061208.img"
1.Modify: After reset, disable all interrupt first then do other thing. 

Ver. 2.0.5
[2007/01/09] 
OS image file name: "7188xc-20070109.img"
1.modify: Before WDT reset system disable all interrupt.
2.Add "alias" command.
3.Use new method to save password setting.

Ver. 2.0.6
[2007/03/01] 
OS image file name: "7188xc-20070301.img"
1.Fiexd: The problem that the WDT reset may cause the COM1 can not send out any data.

Ver. 2.0.7
[2008/05/02] 
OS image file name: "7188xc-20080502.img"
1.Fiexd: The problem that the last line of "autoexec.bat" is not end with CR+LF,
  after execute autoexec.bat the OS will stop to echo the input commands, but it 
  also execute the commands well.
================================================================================ 
[Chinese Big5]------------------------------------------------------------------
== [改版說明] ================================================================== 
Ver. 2.0.2 
[2005/06/28]
1.修正：使用 RDC CPU 時，修改 RESET MODE 的判斷方式。
  (以前的方式可能會把 POWER ON reset 誤判為 WDT reset)

Ver. 2.0.3
[2005/11/25] 
OS image 檔名: "7188xc-20051125.img"
1.加上支援 INT 0x10，讓使用 1.0 版 LIBRARY 的舊程式可以正常使用 Print()。

Ver. 2.0.4
[2006/12/08] 
OS image 檔名: "7188xc-20061208.img"
1.修改：一開機先把所有中斷 disable 之後再處理其他事項。

Ver. 2.0.5
[2007/01/09] 
OS image 檔名: "7188xc-20070109.img"
1.修改：reset 之前先所有中斷 disable 以及 timer 也 disable 。
2.加上 alias 命令。
3.password 設定的儲存使用新的方式處理。

Ver. 2.0.6
[2007/03/01] 
OS image 檔名: "7188xc-20070301.img"
1.修正 WDT reset 可能造成 COM1 無法正常輸出的問題。

Ver. 2.0.7
[2008/05/02] 
OS image 檔名: "7188xc-20080502.img"
1.修正: autoexec.bat 最後一行沒有用 CR+LF 結束時，執行完 autoexec.bat 之後，OS不會
回應收到的命令。(還是有執行該命令，但沒有回應收到的命令。)
================================================================================