================================================================================ 
    MiniOS7 Ver. 2 for I-7188XB
================================================================================ 
Ver. 2.0.2 
[2005/07/01]
1.Fixed: Using new method to detect the reset mode for RDC CPU.
  (The early version may detect a wrong result for POWER ON reset to WDT reset.) 
[2005/08/08]
1.Add the "crlf mode" to the command "use com" for test 752N modules. 

Ver. 2.0.3 
[2006/06/14] 
OS image file name: "7188xb_CR_20060614.img"
1. Modify: Set when WDT timeout occures to generate an NMI interrupt.
2. This version and later can be used on the I-7188XA RoHS version. 

Ver. 2.0.4 
[2006/09/21] 
OS image file name: "7188xb_CR_20060921.img"
1. Modify the code for ISR of WDT NMI to make the system more stable.

Ver. 2.0.5 
[2006/12/07] 
OS image file name: "7188xb_CR_20061207.img"
1.Modify: After reset, disable all interrupt first then do other thing. 

Ver. 2.0.6 
[2007/01/09] 
OS image file name: "7188xb_CR_20070109.img"
1.Modify: Before reset(Soft reset or WDT reset), disable all interrupt and disable 
  all timer.
2.Add command "Alias"
3.Modify the data format for the password value.   

Ver. 2.0.7 
[2007/03/01] 
OS image file name: "7188xb_CR_20070301.img"
1.Fiexd: The problem that the WDT reset may cause the COM1 can not send out any data.

Ver. 2.1.0 
[2007/09/13] 
OS image file name: "7188xb_CR_20070913.img"
1.Support H/W rev. 3.5.
  (A)add Flash memory write protect jumpper.

Ver. 2.1.1
[2007/12/14] 
OS image file name: "7188xb_CR_20071214.img"
1.Fixed: the last version of MiniOS7 OS doesn't execute programs on old 7188xb hardware.(only work on rev 3.5 hardware)

Ver. 2.1.2
[2008/05/02] 
1.Fixed: The problem that the last line of "autoexec.bat" is not end with CR+LF,
  after execute autoexec.bat the OS will stop to echo the input commands, but it 
  also execute the commands well.
[2009/12/16]
1.Modified: COM1 ISR.
================================================================================ 
[Chinese Big5]------------------------------------------------------------------
== [改版說明] ================================================================== 
Ver. 2.0.2 
[2005/07/01]
1.修正：使用 RDC CPU 時，修改 RESET MODE 的判斷方式。
  (以前的方式可能會把 POWER ON reset 誤判為 WDT reset)
[2005/08/08]
1."use com" 加上 crlf mode，以便配合測試 752N。 

Ver. 2.0.3 
[2006/06/14] 
OS image 檔名: "7188xb_CR_20060614.img"
1. 修改 WDT RESET 的處理方式。
2. 修改相容於 RoHS 版本。 

Ver. 2.0.4 
[2006/09/21] 
OS image 檔名: "7188xb_CR_20060921.img"
1. 修改 WDT RESET 的處理方式(測試)。

Ver. 2.0.5 
[2006/12/07] 
OS image 檔名: "7188xb_CR_20061207.img"
1.修改：開機後先把所有中斷 disable 之後再繼續處理其他事項。 

Ver. 2.0.6
[2007/01/09] 
OS image 檔名: "7188xb_CR_20070109.img"
1.修改：reset 之前先所有中斷 disable 以及 timer 也 disable 。
2.加上 alias 命令。
3.password 設定的儲存使用新的方式處理。

Ver. 2.0.7
[2007/03/01] 
OS image 檔名: "7188xb_CR_20070301.img"

Ver. 2.1.0
[2007/09/13] 
OS image 檔名: "7188xb_CR_20070913.img"
1.支援硬體 rev 3.5 改版。
  加上 flash 防寫 jumpper。

Ver. 2.1.1
[2007/12/14] 
OS image 檔名: "7188xb_CR_20071214.img"
1.修正上一版在舊的 7188xb 無法執行程式的問題(上一版只能在 rev 3.5版上執行程式)。

Ver. 2.1.2
[2008/05/02] 
OS image 檔名: "7188xb_CR_20080502.img"
1.修正: autoexec.bat 最後一行沒有用 CR+LF 結束時，執行完 autoexec.bat 之後，OS不會
回應收到的命令。(還是有執行該命令，但沒有回應收到的命令。)
[2009/12/16]
1.修改 COM1 ISR.
================================================================================