Copyright March 2002 by ICP DAS CO., LTD. All right reserved.

The ISaGRAF embedded driver is firmware burned into the flash 
memory of the VP-2117/VP-2117-TC. It can be easily upgraded by the user.

Our newly released driver can also be obtained from the following
website.
   ftp.icpdas.com/pub/cd/8000cd/napdos/isagraf/vp2k/driver/  

Warning:
  The copyright of the firmware and ISaGRAF embedded driver belongs to ICP DAS CO., LTD. 
  Only the VP-2117/VP-2117-TC controller have registered a legal ISaGRAF Target license.
  To burn an ISaGRAF embedded driver into others is absolutely illegal and may be punished by law. 

Trademark:
  Products, names and trade names appeared belongs to their respective owner. 

Make sure of your current driver version before you upgrade it. 


************** We use driver version 1.01 as an example ********************


1. Create a file folder named "VP2000" in your hard drive. 
   For example, "c:\vp2k".

2. Copy \Napdos\ISaGRAF\vp2k\Driver\1.01\"7188xw.exe", "7188xw.ini" , "7188xw.f4" ,
   "isa_vp.exe" , "autoexec.bat" ,"isa_data.exe" & "vp_20090612.img" 
   from the CD_ROM into your "vp2000" folder.

3. Run "\vp2k\7188xw.exe" in your hard drive. A "7188xw" screen will appear. 

4. Link COM1 or COM2 of your PC to COM1 of the VP-2117 controller through a RS232 cable. 

5. Power off the VP-2117, change the DIP switch on the left side of control panel to ¡§Init¡¨, and then power it up.

6. If the connection is Ok, messages will appear on the 7188x screen.

      ICP_DAS MiniOS7 for ViewPAC-2111 Ver. 2.04 build 012,Jun 03 2009 15:48:27
      SRAM:768K, FLASH MEMORY:512K
      [CPU=ICPDAS R2240I]
      CPU internal WDT is ENABLE(WDT time = 0.8 sec)
      Serial number= 5A 5A 5A 5A 5A 5A 5A 5A
      
      VP-2111>

7. Type ver to see the current OS date and version

      VP-2111> ver

      ICP_DAS MiniOS7 for ViewPAC-2111 Ver. 2.04 build 012,Jun 03 2009 15:48:27
      SRAM:768K, FLASH MEMORY:512K
      [CPU=ICPDAS R2240I]
      CPU internal WDT is ENABLE(WDT time = 0.8 sec)
      Serial number= 5A 5A 5A 5A 5A 5A 5A 5A

8.Type "isa_vp *p=", the driver version No. and copyright message will be displayed.

      VP-2111> isa_vp *p=

      VP-2117 Driver: isa_vp.exe - 1.01, Apr.26,2010
      MiniOS7 : Must use vp-20090603.img
      isa_data.exe - 1.01,Jan.25,2010
      NED-ID  : 1
      Licence is OK
      COM1 is Modbus RTU slave port,19200,8,N,1
      COM2 & COM3 are free
      Flash Menory is unprotected; refer to www.icpdas.com > FAQ > Software > 
      ISaGRAF > 089 for more detail info.
      (C)Copyright:ICP DAS  CO. , LTD.      Taiwan Id:84517297


To burn an ISaGRAF embedded driver, follow the following steps. 

9. Power off the VP-2117, change the DIP switch on the left side of control panel to ¡§Init¡¨, and then power it up.

10. Press "F4" to auto dowload "autoexec.bat","isa_vp.exe","vp_20090612.img"  
   and reboot system. Wait about 60 SEC. to update ISaGRFA system.
   
   ***DO NOT REMOVE THE POWER IN THESE 60 SEC.***   

11. Type "dir" to make sure "autoexec.bat" and "isa_vp.exe" 
    are well burned.

      VP-2111> dir
       0)autoexec.bat 02/26/2003 05:30:00     24[00018]8002:0000-8003:0008
       1)isa_vp.exe   04/26/2010 15:40:20 143038[22EBE]8005:0008-A2F1:0006
      Total File number is 2  Free space=315594 bytes

12. Press ALT_X to exit "7188xw".

13. Please change the DIP switch on the left side of control panel to ¡§Run¡¨, then reboot the VP-2117 PAC.