Files list and explain of X-Server ( TCP version) Update: Aug,25,2008

[Common client ]

[ Xserver Demos ]  [ End ]

  Common client                                                                                  Top

Client programs

Explanation

Special Demo

Client1

Used to test all simple Xserver demos

All demos

Client2

Sends "19 0", then delay n ms and send command "19 1".

XDemo12

Client4

Similar to Client1, just adds sending string with "CR" function.

All demos

Client5

Sends period step function signals to I/O port of the 7188E.

XDemo17

***CheckValue

CheckValue main functions:

   1. Catches below errors:

        a. Winsock error

        b. Receive data from Xserver timeout

   2. Checks received data out of range

   3. Automatic reconnect ability.

XDemo22, XDemo25 or demos which return value( total 7 characters) 

***CheckString

CheckString main functions:

   1. Catches below errors:

        a. Winsock error

        b. Receive data from Xserver timeout

   2. Checks received data

        a. Full comparison

        b. Part comparison

   3. Automatic reconnect ability.

All demos
***GetString

GetString main functions:

   1. Catches below errors:

        a. Winsock error

        b. Receive data from Xserver timeout

   2. Automatic reconnect ability.

   3. Large text box can show 1600 bytes on one page.

All demos

I8017H (8E only)

Reads data from I-8017H

XDemo51

DemoBoardII For Demo Board II  @ May/2002. XDemo33
..... More client programs

Common client programs are located at 7186e\PC_Tools\PC Test Program\Client\Common

    Xserver Demo               Function --> Demo mapping list          Top   End

Demo  Function  Explanation Client 
XDemo04 (Original X-Server) Echoes command string  Echo user's command back. Client1
XDemo05  Echoes special string to clients Xserver will echo "7188_Series." or "8000_Series." to clients. Client1
XDemo06 (7E only)

Reads/writes the I/O port of the 7188E

This demo shows how to use command 19 to replace command 17, 18 Client1
XDemo07 Uses printCom1 to debug programs You can use "printCom1" to send a Debug string to PC monitor by 7188E/8000E's COM1.
 
Client1
XDemo08 Uses Print to debug programs You can use "Print"  to send a Debug string to PC monitor by 7188E/8000E's COM1.
If you want to use "Print", you must use "DisableCom" and "RestoreCom"  to disable "printCom1".
Client1
XDemo09 Timer trigger demo UserCount will be executed every second. Count value will be increased in UserCount. PC can read count value to know how many seconds after count value be cleared. Client1
XDemo10 Refreshes Watchdog demo If user's function cost more than 1.6 seconds. User must insert RefreshWDT function to refresh WDT avoid the OS restarting
 itself in 1.6 second.
Client1
XDemo11 (7E only) Real- time I/O controlling This demo shows complex real time DI/DO operation in UserLoopFun. Client1
XDemo12 Scan-time evaluation UserLoopFun will increase count value every scan loop. PC can read how many scan loops there are after clear count value. So user can use this demo to test Xserver performance. Client2
XDemo13 (7E only) Pulse width measurement UserLoopFun reads the D/I signal. If signal is changed, records time ticks and calculates signal width. Client1
XDemo14 Controls 7-SEG LED Show5DigitLed, Show5DigitLedWithDot can show 5 digits to 7-SEG LEDs
The two functions can show '0' ~ '9'
                                         'a' ~ 'f'
                                         'A' ~ 'F'
                                         ' ', '-', '.'
Client4
XDemo15 (7E only) Reads channel values from 7017/7018 This demo shows how to send command to read channel value from 7017 or 7018 which is connected to 7188E's COM2. Client4
XDemo16  Using COM ports to communicate with devices This demo shows how to use COM port to communicate with
our 7000, 87K series devices or other series product without
using the "SendCmdTo7000" and "ReceiveResponseFrom7000" function. the command and the response of these devices are not all
terminated by 0x0d. Please refer to the user's manual to modify the terminal char.
Client4
XDemo17 (7E only) Pulse width measurement This demo is similar to XDemo13 and detects signal change and measures signal width. Client5
XDemo18 Reads I-7000 series module's ID This demo shows how to communication with the 7000 series which connected to COM2 of 7188E or connected to COM3 of 8000E. Client4
XDemo19 Reads 64 bits unique hardware serial number Unique serial number is used to protect user's software. Using 7188xw.exe to enter 7188E, MiniOS7 will show a number. User can check the number at first, then decide to execute Xserver from that point on. Client4
XDemo20 Reads/Writes/Clears NVRAM Using type int,float,string. NVRAM's characteristic is short response time, limitless erasure and  battery backup for 10 years. Client4
Read multi-bytes data from NVRAM using function NVRAM_MultiRead. Write multi-bytes data to NVRAM using function NVRAM_MultiWrite.
XDemo21 Controls hardware in UserCount function. Actions concerning hardware control in UserCount is prohibited. If users want to control hardware in UserCount, they must use flag variable to pass the command to UserLoopFun. Function of hardware can be executed correctly in UserInit, UserLoopFun, UserCmd. This demo will increase numbers every second and show the value in the LEDs in UserCount function. Client4
*XDemo22 (7E only) Data Acquisition & Compression & Averaging ODM for Contec company CheckValue
**XDemo23 Echoes all data (including "23") to specific clients. Uses VcomSendSocket to echo all data (including "23") to specific clients.  Client4
XDemo24 Uses countdown timer There are 8 countdown timer (channel 0 to channel 7). This demo uses channel 0. The countdown timer initial value is 1000 ms. When the countdown timer value become 0, the value of the LED will increase. None
*XDemo25 (7E only) Data Acquisition, Compression ,& Averaging Not available. CheckValue
XDemo26 Links to MMI by Modbus serial protocol Not available.   
XDemo27 (7E only) Modbus/TCP to Modbus/RTU Master/Slave converter Modbus Lib is already released. Please refer to CD:\Napdos\Modbus\*.* for information about Modbus. Any Modbus/TCP client program 
XDemo28 Reads information from text files (basic)

In many applications, users need one text file to record some information. And the program can read it. You can use FSeek to get specific information in text files. like:

=================================================
config file sample for XDemo28
=================================================
Star Item1 Item2 Item3 Item4 Comment
=================================================
* 1st 19200 on 1.25 ;comment1
* 2nd 9600 off -1.3 ;comment2
* 3rd 2400 off 19.34 ;comment3
= end of settings =
=================================================
comment...........

Client4
XDemo29 Reads information from text files (advance)

In many applications, users need one text file to record some information. And the program can read it. You can use GetProFileInt, GetProFileStr to get specific information in text files. like:

=====================================
config file sample for XDemo29
=====================================
* baudrate=115200 ;integer type
* Debug=on ;string type
* slot0=I8024 ;string type ID name
=====================================
comment...........

Client4
XDemo30 (7E only) I/O Expsansion Bus X304 X304: 3 channel 12-Bit A/D (Analog input)   +/- 5.0V 
         1 channel 12-Bit D/A (Analog output) +/- 5.0V 
         4 channel D/I 
         4 channel D/O 
Client4
XDemo31 (7E only) I/O Expsansion Bus X310 X310: 2 channel 12-Bit A/D (Analog input)
              ch0: 0~20mA
              ch1: 0~10V
         2 channel 12-Bit D/A (Analog output) 0.0~10.0V
         3 channel D/I 
         3 channel D/O
Client4
XDemo32 Backup system for Demo Board I. When one client connects to the 7188E/8000E, the client gets the control of the system.
When no client connects to the 7188E/8000E, or the client crashes, the 7188E/8000E runs the control rules that users wrote in Xserver.
That makes the whole system runs continually.

For running Demo Board I (May/2002)

7188E (COM2, Baudrate=9600, checksum disable)
+ I-7012(#01, AI*1, 0~20mA) In <==> IOut of I-7021
+I-7021(#02, AO*1, 0~20mA) IOut <==> Current meter <==> In of I-7012
+ I-7044(#03, DI*4 + DO*8) DI0~DI3 <==> Button0~Button3

Button0 ==> Lamps
Button1 ==> Step motor
Button2 ==> Analog output & input
Button3 ==> Step motor direction inverse.
DO0~DO3 <==> A+/A-/B+/B- of Step motor
DO4~DO7 <==> Lamp0~Lamp3

+ I-7013(#04, RTD*1) <==> RTD

CD:\Napdos\Others\ DemoBoard\DBoardI\*.*
XDemo33 Backup system for Demo Board II. When one client connects to the 7188E/8000E, the client gets the control of the system.
When no client connects to the 7188E/8000E, or the client crashes, the 7188E/8000E runs the control rules that users wrote in Xserver.
That makes the whole system runs continually.

For running Demo Board II (May/2002)

7188E (COM2, Baudrate=115200, checksum disable)
+ I-87017(#00, AI*8) ch0~ch7 <==> ch0 of I-87024
+ I-87057(#01, DO*16) ch0~ch11 <==> Lamp0~Lamp11
+ I-87013(#02, RTD*4) ch0 <==> RTD
+ I-87024(#03, AO*4) ch0 <==> ch0~ch7 of I-87017
+ I-87053(#05, DI*16) ch0~ch15 <==> ch0~ch15 of I-87057
+ I-87057(#06, DO*16) ch0~ch15 <==> ch0~ch15 of I-87053

DemoBoardII
XDemo34 Using the "Command23" to reading the counter every sec. The demo is similar to the XDemo23. It can using a global variable to save the socket number. and then, User can send data to client program using function VcomSendSock() in the other sub routine. Client4
XDemo36 (8E only) Reads Units and modules's IDs This demo is the default shipping program for 8431/8831. Users can use this demo to find out which modules are plugged in 8000E. Client4
XDemo37 (8E only) Reads Systemkey status This demo uses command 23 to switch on/off auto return system status.
PC sends command "23 on" at beginning. When user press system key, Xserver will auto reply which system key pressed.
Client4
XDemo38 (8E only) Shows LED of 8000 modules Only LED of DO and DIO parallel modules can be set by function ShowLED8 & ShowLED16
And the module must have total 16 channels.
Client4
XDemo39 (8E only) Sets LED of 8000 units Controls L1, L2 and L3 of 8000 units. Client4
XDemo40 (8E only) D/I from 8000 modules (16 DI channels) Uses DI_16 to D/I from parallel DI modules (16 DI channels) on 8000 slots Client4
XDemo41 (8E only) D/I from 8000 modules (8 DI channels)  Uses DI_8 to D/I from parallel DI or DIO modules (8 DI channels) on 8000 slots Client4
XDemo42 (8E only) D/O to 8000 modules (16 DO channels) Uses DO_16 to D/O to parallel DO modules (16 DO channels) on 8000 slots Client4
XDemo43 (8E only) D/O to 8000 modules (8 DO channels)  Uses DO_8 to D/O to parallel DO modules (16 DO channels) on 8000 slots Client4
XDemo44 (8E only) D/O to 8000 modules (8 DO channels) Uses DIO_DO_8 to D/O to parallel DIO modules (8 DO channels) on 8000 slots Client4
XDemo45 (8E only) Use COM3 to control 87K modules   Client4
XDemo46 (8E only) Uses Modbus/TCP protocol to access 8000 modules Modbus Lib is already released. Please refer to CD:\Napdos\Modbus\*.* for information about Modbus.  
XDemo47 (8E only) D/I from 87K modules (8, or 16 DI channels) D/I  to 87K series DI or DIO modules on 8000 slots Client4
XDemo48 (8E only) D/O to 87K modules (4 , 8, or 16 DO channels) D/O  to 87K series DO or DIO modules on 8000 slots  Client4
XDemo49 (8E only) A/O to I-8024 Uses I-8024 that plugged in slots of 8000 Unit to output analog signals. Client4
XDemo50 (8E only) A/O to I-87024 Uses I-87024 that plugged in slots of 8000 Unit to output analog signals. Client4
XDemo51 (8E only) A/I from I-8017H

I-8017H is a high speed analog input module. This demo show how to read data from I-8017H. We use two TCP port:
port 10000: for receiving commands from PC.
port 9999: for sending data to PC.

This demo provides 5 modes to read the data:

  • 1 channel A/D convert to Float
    (1 sampling point)
  • 1 channel A/D convert to HEX
    (1 sampling point)
  • 1 channels polling mode A/D convert to Hex
    (multi sampling points)
  • 1 channel interrupt mode A/D convert to Hex
    (multi sampling points)
    (Sampling rate: 50K Hz Max.)
  • 8 channels interrupt-scan mode A/D convert to Hex
    (multi sampling points)
    (Sampling rate: 10K Hz Max.)
I8017H
XDemo57 The client function of 7188E /8000E This demo provides the client functions for 7188E modules.You can use them to communicate with other i-7188E modules. 

 PC(monitor)(Com1)<---RS232--->(Com1) 7188E(client) <--->Hub<--->7188E(server)

The 7188E/8000E can acts as a client/server,
 and communicate with other TCP/IP server without any PC help.

Client1
XDemo58(8E only) The Client functions using TCP/IP protocol for 8000E modules. This demo provides the client functions using TCP/IP protocol for 8000E modules.Apply the functions to read the 5 channels of the analog input of the 7018 module through the 7188E modules via Internet, but doesn't need any PC.

8000E(client/server) <--->Hub<--->7188E(server)(Com2)<---RS485--->7018D(Com1)

The 7188E/8000E can acts as a client/server,
 and communicate with other TCP/IP server without any PC help.

N/A
XDemo60 (8E only) 8142/ 8144        8112/ 8114  I-8142 module has 2 RS485/RS422 com ports.This demo shows how to use one of the RS485/RS422 port of  I-8142 module to communicate with another port.

I-8144 module has 4 RS485/RS422 com ports.It's the same as I-8142.The one of the RS485/RS422 com port can communicate with the others.

The functions of I-8112/8114 module are same as i8142/8144 except the pin assignment.I-8112/8114 module has 2,4 RS232 COM ports,so the wiring of I-8112/8114 is different with I-8142/8144 module.

Client1
XDemo62 Reads/Writes EEPROM The total size of EEPROM is 2K bytes.
It is suitable to store data that is not changed so frequently, like USER ID, PASSWORD etc.
It can be rewrited about 1,000,000 times.
Client4
XDemo63 Reads/Writes/Clears Flash There are two type Flash Memory used on 7188x/I-8000 series, 256K bytes and 512K bytes.                                                                                      It can be rewrited about 100,000 times. Client4
Read multi-bytes data from Flash using function Flash_MultiRead().        Write multi-bytes data to Flash using function Flash_MultiWrite().
XDemo64 SMTP client(Send E-mail) This demo showed how to use the Simple Mail Transfer Protocol(SMTP) in the 7188E to send the electronic mail to the user's mail box directly through the message transfer agent in the SMTP server. Client4
XDemo65 Time Synchronization using ICMP protocol This demo is used to synchronize the time of 7188E acted as client or server to another server or reference time source through ICMP protocol Client4
XDemo66(8E only) DAM function Use DMA to access 87K module that plug in the slot of the I-8000 system None
XDemo68 DHCP unavailable  
XDemo69(7E only) Save the channel value from 7018 and DI to save to Flash (Log) This demo showed how to build a Data log system on the 7188E series. The valid logs totally saved to Flash are 12288. The every log occupies the 16bytes of the Flash. Client4
XDemo70 Access Domain-name address In many applications, users hope to connect directly with the server by domain name, not IP address. This demo showed how to access domain name in the 7188E.

Get the IP address of domain name using function DN_to_IP().
None
XDemo71 I-7188EF-016 I-7188EF0-16 Xserver demo for reading DI and writing DO of FRnet modules Client4
..... More demo programs

Xserver demo for 7186E are located at 7186e\Demo\Xserver\Demo\[BC|MSC|TC]                                             

 

  Top     End      Xserver Demo