$AASiC

This command for clear the Digital Low Latch and High Latch value from the specified slot of Digital I/O module.
This command only applies on all 87K digital I/O modules with digital input channel which are plugged in the specified Slot of the I-8000 system.

 $AASiC[CHK](cr)

#	a delimiter character
AA	address number of the I-8000 system. AA= 00 ~ FFh
Si	slot number of the module. i = 0 ~ 3 or 0 ~ 7
C	Command for Clear Latch
[CHK]	2 characters of Checksum
(cr)	Character Return(0x0D) for denote the end of the command

Valid Command	!AA[CHK](cr)
Invalid Command	?AA[CHK](cr)

Syntax error or communication error may get no response.

!	delimiter for valid command
AA	address number of the I-8000 system. AA= 00 ~ FFh
?	delimiter for invalid command
[CHK]	2-characters of Checksum
(cr)	Character Return(0x0D) for denote the end of the response

Command	$01S1C
Response	!01
Description	The example clear  the digital  module's low latch and high latch value from slot 1 of the I-8000 system at address 01h.

 I-87040, I-87051,  I-87052, I-87053, I-87054, I-87055, I-87057,
 I-87063