Command |
~AASi5P |
Description |
Enables power on value of DO or DIO module in specific
slot of the I-8000 system. The current DO status is set to power on
value. |
Syntax |
~AASi5P[CHK](cr)
~ |
a delimiter character |
AA |
address number of the I-8000 system. AA= 00 ~ FFh |
Si |
slot number of the module. i = 0 ~ 3 or 0 ~ 7 |
5P |
command to set and enable power on value |
[CHK] |
2-characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of the command |
|
Response |
Valid Command |
!AA[chk](cr) |
Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
! |
delimiter for valid command |
? |
delimiter for invalid command |
AA |
address number of the I-8000 system. |
[CHK] |
2 characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of the response |
|
Example |
Command |
~01S75P |
Response |
!01(cr) |
Description |
Enables power on value of DO or DIO module in slot7 of the I-8000
system (address=01h) and set the current DO status as power on
value. |
|
|
Modules |
DO or DIO modules |
|