Command $AAT1
Description Read the I/O module number of slot 4 to 7 from the specified I-8810/I-8811 system
Syntax $AAT1[CHK](cr)
$ a delimiter character
AA 2-characters HEX module address for the specified I-8000 system ,Range from 01 to FFh
T1 Command for read I/O module name.slot4 to 7
[CHK] 2-characters of Checksum
(cr) Character Return(0x0D) for denote the end of command
Response
Valid Command !AAS4S5S6S7[chk](cr)
Invalid Command ?AA[CHK](cr)
Syntax error or communication error may get no response.
! delimiter for valid command
? delimiter for invalid command
AA 2-characters HEX module address
S4~S7 S4S5S6S7 => represent the I/O module name of slot4 to 7 for I-8810/I-8811.
[CHK] 2-characters of Checksum
(cr) Character Return(0x0D) for denote the end of response
Example
Command $01T1
Response !01172455FF(cr)
Description The example reads the specified I-8810 at address 01h. The I/O module numbers 17,24 and 55 in slot 4 to 6 and without any module in slot 3. This means the I-8810 system contains 8017,8024,8055 in slot4 to 6.


Modules I-8410,I-8810,I-8430,I-8431,I-8830,I-8831,I-8KE4,I-8KE8


Back to Previous Page