Note:These Command Just for Slave I-8000 Series

Command	$AAT
Description	Read the I/O module number of 4 slots or 8 slots(Slot0 to Slot3) from the specified I-8000 system
Syntax	$AAT[CHK](cr) $ a delimiter character AA 2-characters HEX module address for the specified I-8000 system ,Range from 01 to FFh T Command for read I/O module name. [CHK] 2-characters of Checksum (cr) Character Return(0x0D) for denote the end of command
Response	Valid Command !AAS0S1S2S3[chk](cr) Invalid Command ?AA[CHK](cr) Syntax error or communication error may get no response. ! delimiter for valid command ? delimiter for invalid command AA 2-characters HEX module address S0~S3 S0S1S2S3 => represent the I/O module name for I-8410. [CHK] 2-characters of Checksum (cr) Character Return(0x0D) for denote the end of response
Example	Command $01T Response !01172455FF(cr) Description The example reads the specified I-8000 at address 01h. The I/O module numbers 17,24 and 55 in slot 0 to 2 and without any module in slot 3. This means the I-8000 system contains 87017,8024,8055 in slot 0 to 2.
Modules	I-8410,I-8810,I-8430,I-8431,I-8830,I-8831,I-8KE4,I-8KE8

Back to Previous Page