Command |
$AA2 |
Description |
Read the configuration status from the specified I-8000 system. |
Syntax |
$AA2[CHK](cr)
$ |
a delimiter character |
AA |
2-characters HEX module address for the specified I-8000 system
,Range from 01 to FFh |
2 |
Command for read configuration status. |
[CHK] |
2-characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of command |
|
Response |
Valid Command |
!AACCFF[chk](cr)
|
Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
! |
delimiter for valid command |
? |
delimiter for invalid command |
AA |
2-characters HEX module address |
CC |
Baudrate code Baudrate |
FF |
Data format code Format |
[CHK] |
2-characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of response |
|
Example |
Command |
$012 |
Response |
!010A00(cr) |
Description |
The example reads the configuration from the I-8000 system
at address 01h.
Baudrate = > 115.2K bps
Check sum => enabled |
|
|
|
Modules |
I-8410,I-8810,I-8430,I-8431,I-8830,I-8831,I-8KE4,I-8KE8
|
|