Command |
~AALPS |
Description |
This command turn the specified single LED ON/OFF in the I-8000 system. |
Syntax |
~AALPS[CHK](cr)
~ |
a delimiter character |
AA |
2-characters HEX module address for the specified I-8000 system
,Range from 01 to FFh |
L |
command for turn LED ON/OFF |
P |
Specified the LED
from left to right => LED1,LED2,LED3 |
S |
S=1,LED ON
S=0,LED OFF |
[CHK] |
2 characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of command |
|
Response |
Valid Command |
!AA[CHK](cr) |
Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
! |
delimiter for valid command |
? |
delimiter for invalid command |
AA |
2-characters HEX module address |
[CHK] |
2-characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of response |
|
Example |
Command |
~01L11 |
Response |
!01 |
Description |
This example turn on the LED1 in the I-8000 system at address 01h
The response indicates the command is valid. |
|
|
Modules |
I-8410,I-8810,I-8430,I-8431,I-8830,I-8831,I-8KE4,I-8KE8
|
|