Note:These Command Just for Slave I-8000 Series

Command	~AADMT
Description	This command set the specified 5-digits display mode in the I-8000 system.
Syntax	~AADMT[CHK](cr) ~ a delimiter character AA 2-characters HEX module address for the specified I-8000 system ,Range from 01 to FFh D command for set 5-digits display T command for set 5-digits display Mode T = U ; set the 5-digits display to user mode T = S ; set the 5-digits display to system mode [CHK] 2 characters of Checksum (cr) Character Return(0x0D) for denote the end of command
Response	Valid Command !AA[CHK](cr) Invalid Command ?AA[CHK](cr) Syntax error or communication error may get no response. ! delimiter for valid command ? delimiter for invalid command AA 2-characters HEX module address [CHK] 2-characters of Checksum (cr) Character Return(0x0D) for denote the end of response
Example	Command ~01DMU Response !01 Description This example set the 5-digits display to user mode in the I-8000 system at address 01h So user can use the "~AADV","~AADPV" and "~AALPS" command to control the display and led of the I-8000 system The response indicates the command is valid.
Modules	I-8410,I-8810,I-8430,I-8431,I-8830,I-8831,I-8KE4,I-8KE8

Back to Previous Page