Command |
@AASiDO(Data) |
Description |
Set Digital Output |
Syntax |
@AASiDO(Data)[CHK](cr)
@ |
a delimiter character |
AA |
address of setting module (00 to FF) |
Si |
slot number of the module. i = 0 ~ 3 or 0 ~ 7 |
DO |
command for setting digital output. |
(Data) |
digital output value
00 = DO1 off,
DO0 off
01 = DO1 off,
DO0 on
02 = DO1 on,
DO0 off
03 = DO1 on,
DO0 on |
[CHK] |
2 characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of
command |
|
Response |
Valid
Command |
!AA[CHK](cr) |
Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
! |
delimiter for valid command |
? |
delimiter for invalid command. |
AA |
address of response module (00 to FF) |
[CHK] |
2 characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of
response |
|
Example |
Command |
@01S1DO00 |
Response |
!01 |
Description |
Set address 01 digital output 00, return success. |
|
Modules
|
I-87082 on
I-8000 slave I/O unit
|
Reference |
|
|