Command |
$AASiCjM |
Description |
Read PWM Mode for certain channel |
Syntax |
$AASiCjM[CHK](cr)
$ |
a delimiter character |
AA |
address of reading module (00 to FF) |
Si |
slot number of the module. i = 0 ~ 3 or 0 ~ 7 |
Cj |
j = 0
=
read maximum counter value of counter 0
j = 1 = read
maximum counter value of counter 1
(j=0 to 7) |
M |
command for PWM Mode |
[CHK] |
2 characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of
command |
|
Response |
Valid
Command |
!AAx[CHK](cr) |
Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
! |
delimiter for valid command |
? |
delimiter for invalid command. |
AA |
address of response module (00 to FF) |
x |
1 continuous mode ; 0 burst count mode |
[CHK] |
2 characters of Checksum |
(cr) |
Character Return(0x0D) for denote the end of
response |
|
Example |
Command |
$01S0C0M |
Response |
!010 |
Description |
Read address 01,slot 0 module's
PWM Mode of channel
0, return value 0 (burst count mode). |
|
Modules |
I-8088W on I-8000 slave I/O unit |
Reference |
$AASiCjM(Data)
|
|