| Command |
$AASiCjRHC |
| Description |
Read the specified analog input channel and slot High/Low alarm
connection in the I-8000 system. |
| Syntax |
$AASiCjRHC[CHK](cr)
| $ |
a delimiter character |
| AA |
2-characters HEX module address for the specified I-8000 system
,Range from 01 to FFh |
| Si |
Specified slot number. i = 0 to 3(4 slots) or
i = 0 to 7(8 slots) |
| Cj |
specified channel number. |
| R |
Command for Read Alarm Function |
| H |
High/Low alarm, H = High alarm, L = Low alarm |
| C |
The connection of Alarm |
| [CHK] |
2 characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of command |
|
| Response |
| Valid Command |
!AASkCn[CHK](cr) |
| Invalid Command |
?AA[CHK](cr) |
Syntax error or communication error may get no response.
| ! |
delimiter for valid command |
| ? |
delimiter for invalid command |
| AA |
2-characters HEX module address |
| Sk |
Specified the slot number of digital output module.
k = 0 to 3(4 slots) or k = 0 to 7(8 slots) |
| Cn |
Specified the channel number of digital output module.
n = 0 to F |
| [CHK] |
2-characters of Checksum |
| (cr) |
Character Return(0x0D) for denote the end of response |
|
| Example |
| Command |
$01S3C0RLC |
| Response |
!01S0C5 |
| Description |
The low alarm connection for the analog input channel 0,
slot 3 is setting with channel 5, slot 0 in the I-8000 system
at address 01h. |
|
|
| Modules |
I-87013, I-87016, I-8017H, I-87017, I-87018
|
|