| Analog Input | Input Channels | 6 (Differential ) |
| Input Type | +/-150mV, +/-500 mV, +/-1V, +/-5 V, +/-10 V,+/-20 mA, (Jumper Selectable) |
|
| Resolution |
16-bit(Normal Mode) 12-bit(Fast Mode) |
|
| Sampling Rate | 10 samples/second total(Normal Mode) 60 samples/second total(Fast Mode) |
|
| Accuracy | +/- 0.1% (Normal) +/- 0.5% (Fast) |
|
| Voltage Input Impedance | 2 MOhm |
|
| Current Input Impedance |
125 Ohm |
|
| Overvoltage Protection | 240 Vrms |
|
| Analog Output |
Output Channels |
2 |
| Output Type |
+0 V ~ +5 V, +/-5 V, +0 V ~ +10 V, +/-10 V,+0 mA ~ +20 mA, +4 mA ~ +20 mA(Jumper Selectable) |
|
| Resolution | 12-bit |
|
| Accuracy | +/-0.1% of FSR |
|
| Voltage Output Capability |
10 V @ 20 mA |
|
| Current Load Resistance |
500 Ohms |
|
| Power-Up and Safe Value |
Yes |
|
| Open Wire Detection for Current Output |
Yes, Only 4 ~ 20 mA. |
|
| Digital Input |
Input Channels |
2 |
| Input Type |
Wet contact (Sink) |
|
| On Voltage Level |
+3.5 VDC ~ 50 VDC |
|
| Off Voltage Level |
+1 VDC Max. |
|
| Input Impedance |
10 KΩ, 0.66W |
|
| Digital Output |
Output Channels |
2 |
| Output Type |
Isolated Open Collector (Sink) |
|
| Max Load Current |
700 mA/channel Max. |
|
| Load Voltage |
+3.5 VDC ~ +50 VDC |
|
| Isolation |
2500 VDC |
|
| ESD Protection |
+/-4 kV Contact for Each Terminal +/-8 kV Air for Random Point |
|
| LED Display | 1 LED as Power/Communication indicator | |
| Power Consumption | Maximum : 2W | |
I-87026PW Pin Assignment
 |
 |
I-87026PW Wire Connection
 |
I-87026PW Dimention
 |
I-87026PW Default Setting
| Configuration | Default Setting | Description |
|---|---|---|
| Type | 08 | -10V to +10V |
| Baudrate | 0A | 115200 bps |
| Format | 00 | 60Hz rejection CheckSum disable Engineer Unit Format |
| Back to Previous Page |
|