I-87017 RW Hardware

I-87017 RW Specification

Analog Input	Input Channels	8 differential
	Input Type	+/- 10V, +/- 5V, +/- 1V +/- 500mV, +/- 150mV -20mA ~ +20mA (with external 125 Ohms resistor)
	Resolution	16-bit / 12-bit
	Sampling Rate	Normal mode : 16-bit,10 samples/sec (total)
	Sampling Rate	Fast mode : 12-bit, 60 sample/sec(total)
	Accuracy	Normal mode : 0.1% of FSR
	Accuracy	Fast mode : 0.5% of FSR
	-3dB BandWidth	15.7Hz
	Zero drift	+/- 20£gV/¢J
	Span drift	+/- 25 ppm/¢J
	Common Mode Rejection	86dB
	Normal Mode Rejection	100 dB
	Input Impedance	>1M Ohms
	Overvoltage Protection	240VRMS
	Intra-module Isolation, Field to Logic	3000VDC
LED Display	1 LED as Power/Communication indicator 16 LEDs as High/Low Alarm signals
Power Consumption	Maximum : 1.1W

I-87017 RW Pin Assignment

I-87017 RW Block Diagram

I-87017 RW Wire Connection

Voltage Input Wiring

Current Input Wiring

I-87017RW Current Input Wiring

Note: When connecting to a current source, an optional external 125-Ohm resistor is required.

Screw wire into
I-87017 RW

I-87017 RW Dimention

I-87017 RW Default Setting

Configuration	Default Setting	Description
Type	08	-10V to +10V
Baudrate	0A	115200 bps
Format	00	60Hz rejection CheckSum disable Engineer Unit Format