| Analog Input | Input Channels | 2 differential |
| Input Type | +/- 15mV, +/- 50mV, +/- 100mV +/- 500mV, +/- 1V, +/- 2.5V -20mA ~ +20mA |
|
| Sampling Rate | 10 samples/second total | |
| Accuracy | +/-0.05% of F.S.R. (Voltage) +/-0.1% of F.S.R. (Current) |
|
| Common Mode Rejection | 150dB @50/60Hz | |
| Normal Mode Rejection | 100dB @50/60Hz | |
| Input Impedance | Voltage: > 400k Ohms Current: ~125 Ohms |
|
| Long Distance Strain Gauge Measurement | Yes | |
| Intra-module Isolation, Field to Logic |
3000VDC | |
| Execitation Voltage Output |
Output Channel |
1 |
| Output Range |
0 ~ +10V |
|
| Max. Output Load current | 80 mA |
|
| Accuracy | +/- 0.05% or Better | |
| Intra-module Isolation, Field to Logic |
3000VDC | |
| Digital Output |
Output Channels |
2 (Sink) |
| Output Type | Isolated Open Collector | |
| Load Voltage | +5 VDC ~ +50 VDC | |
| Load Current | 700mA/channel max. | |
| Photo-isolation | 3750 Vrms | |
| Digital Input |
Input Channels | 2 (Sink) |
| On Voltage Level | +3.5 V ~ 50 V | |
| Off Voltage Level | +1V max | |
| Input Impedance | 10K Ohms, 0.66 W | |
| Event Counter | Channels: 2 | |
| Max. Input Frequency: 50Hz | ||
| Photo-isolation | 3750 Vrms | |
| LED Display | 1 LED as Power/Communication
indicator 4 LEDs as Digital Input/Digitial Output status Indicators |
|
| Power Consumption | Maximum :2.5W | |
 |
| Full-Birdge Sensor |
 |
| Half-Bridge Sensor |
 |
| Quarter-Bridge
Sensor |
 |
| Voltage Input |
 |
| Current Input |
 |
| Execitation
Voltage Output |
 |
| Digital Input |
  |
| Digital
Output |
  |
| Screw wire into I-87016W |  |
 |
| Configuration | Default Setting | Description |
|---|---|---|
| Address | 01 | Module Address = 01 |
| Type | 05 | +/- 2.5 V |
| Baudrate | 0A | 115200 bps |
| Format | 00 | 60Hz rejection CheckSum disable Engineer Unit Format |
| Back to Previous Page |
|