/*
This demo program is for 7K and 87K module general function.      

Compiler: BC++ 3.1,                                                            
          Turbo C ++ 1.01(3.01) (free from http://community.borland.com/museum)
          MSC 6.0,                                                             
          MSVC 1.52.                                                           
                                                                               
Compile mode: large                                                            
                                                                               
Project: 87K_demo.c                                                               
         ..\Lib\(7188xa/b/c.lib,8000.Lib, 8000E.lib)   
                                                                               
Hardware: 7188/8000 <== COM port ==> 7K or 87K modelue

[24 May,2005] by Bill
*/

#include"..\..\lib\7188Xb.h"
/*
=== English comments ==========================================
This demo program is for all functions of 7k and 87K I/O modules .
Users can refer the demo to excute every commands list in 7k and
 87K I/O module's document. For example: $AAM, #AA, @AA, @AA6... etc.

If users wants to use AI,AO,DI,DO,DIO, we have prepared several
demos. Uers can copy the code from these demos then paste to 
their own program.

=== Chinese comments ==========================================
硂絛ㄒ琌皐癸 87K I/O 家舱场
ㄏノ把σ絛ㄒㄓㄏノ– 87K I/O 家舱㏑もい
ㄒ $AAM, #AA, @AA, @AA6... 单单

安ㄏノ璶ㄏノ AI, AO, DI, DO, DIO 硂ㄇи竒非称
计瞷Θ絛ㄒ祘Α盢硂ㄇ祘Α絏钡狡籹祘Αいㄓㄏノ
*/
void main()
{
	unsigned char InBuf[20];   
    
    InitLib();
    
    //Step 1:
    InstallCom_2(115200L,8,0,0); //(Baudrate,Data bit,Parity bit,Stop bit)
    
    //Step 2:
    SendCmdTo7000(2,"$01M",0); 
        /*
        COM2, Command="$AAM" which AA=01,Checksum=disabled
        
        For example: command="$01M" ===> Gets module name at address 01.
        For detailed command sets,refer to 
            CD:\Napdos\DCON\IO_Module\hw_dcon_on_87kUnit or 
            CD:\Napdos\7000\Manual\ 
        */
        
    //Step 3:
    ReceiveResponseFrom7000_ms(2,InBuf,100,0); 
        /*
        COM2, 
        Put received data to InBuf
        Timeout=100 ms
        Checksum=disabled
        */ 
    
    //Step 4:
    Print("InBuf=%s",InBuf);
        
    //Step 5:
    RestoreCom2();
}