Demo list for 7188E

Folder

Demo program

Explanation

Hello

 Hello_C

Detecting if the operation system is MiniOS7. 

Note: MSC does not support C++.  Hello _ C ++ is only supported by BC.
Hello_C++

COM_Ports

 C_Style_IO

1. Shows how to write a function for input data.
2. Retrieves a string.
3. Shows how to use a C function: sscanf,or just use Scanf().
Receive

Receive COM port.
Slv_COM

The PC sends commands to the 7188E, and receives responses from the 7188E. Also shows how to use another COM port or LED to show information to help debug a program.

ToCom_In_Out

Reads/Writes the byte data via the COM port.

DateTime

¡@

Reads the date and time from an RTC and prints it on a monitor (user can set the date and time).

LED

 Led

Shows how to use DelayMs function to switch the LED ON or OFF.
Seg7led Controls red led and 7-segment display.

File

 Config_1_Basic

In many applications, a text file is needed in order to record specific information so that the program can read it. FSeek can be used to retrieve specific information from a text file.
Config_2_Advanced

Extends config_1_Basic, and adds GetProFileInt,  GetProFileFloat, GetProFileStr. These functions can be used to determine the "Type" from a text file.
Memory Demo5

Read and writes to the NVRAM.
EEPROM

Writes a value to the EEPROM and shows it on the monitor.
EEPROM-r

Reads the data stored in the EEPROM.
EEPROM-w

Inputs a value and stores it in an write to EEPROM block 1 peer address (value will automatically increase by 1).
Flash

Reads, writes and erases the Flash memory.
Flash-r

Reads the value that has been written to the flash memory.
Flash-w

Inputs a value written in the flash memory (value will automatically increase by 1).
NVRAM-r

Reads the value that has been written to NVRAM.
NVRAM-w

Writes a value to the NVRAM (value will automatically increase by 1).
Top-Mem

Demonstration of the "AllocateTopMemory()" function
Misc Reset Restores the initial values.
Runprog Uses Ungetch() to run another program.
SerialNumber

The serial number of the 7188E.
Watchdog Enables the Watchdog or bypasses the enabled Watchdog.
7K87K_Module 7K87K_demo_for_com Shows how to connect and control the 7k or 87k modules via COM2.
7K87K_AI_for_Com
7K87K_DI_for_Com
7K87K_DIO_for_Com
7k87K_DO_for_Com
AO_024_for_Com
AO_22_26_for_Com

Timer

Demo90 A demonstration program showing how to use the function.
Demo91 Shows how to use CountDownTimer function channel 0 to switch the LED ON or OFF.
Demo92 Shows how to use StopWatch function on channel 0 to switch the led ON or OFF.
Demo96 Shows how to use the User timer function to control the 5-digit LED.
Demo97 Shows how to use DelayMs function to switch the LED ON or OFF.
Demo98 Shows how to use the 7188E timer function to send/receive data to or from 7000 series modules.

XBoard

   These demo programs for all I/O expansion boards which are applicable to the 7188E module.

¡@

¡@